Separate names with a comma.
Some features disabled for guests. Register Today.
Waiting on parts and will be posting the process of the expansion here. I’ve also upgraded the Z to get 3” in the height with new thicker side...
I was looking to expand my Workbee 1510 X axis to 60”x60” with a 1500mm C-beam. I’ll be bulking up the frame a bit also to accommodate along with...
or nah?
Is there any other driver software besides the Openbuilds driver that can stop and start/restart files mid cut? Thanks,
Tryin to run Mach 3 on my 1510 with blackbox. Any pointers on setup would be much appreciated.
Received and installed in 1 hour. I got the 2” set giving me 3” of clearance now without compromising the frame for depth. And my Z limit issue is...
Just wondering if anyone has these 2” Taller Y side plates installed on they’re Workbee 1510 table currently? And if so, how do you like...
:thumbsup:
Alright here we go...... What I did was remove the belts from the rails, engaged the motors, pulled back and forth on each of the Y gantry belts...
I was also wondering if there was any simple way to access the Y gantry drive pulleys. Just to check the grub screws on each side without having...
I’ll be sure to check ASAP. I’m also experiencing a 1/8 inch difference in all of my cuts. I was making boxes and kept finding that I had a 1/8...
I redid the eccentrics again on the Y plates and got a lot better shape but still no circle.
All 3 of them are in the video.
Not sure I understand. The video says a lot though. You can see the stall in the Y
I created the circle file in 2 different design softwares and both look the same. Not sure at this point. my gantry measurements are spot on...
Checked that, and went threw all the eccentrics again for a smooth roll and it’s got even worse. Not sure what’s happening.
Video
I feel I've done just about everything. -Adjusted eccentrics on all axes to (finger rollable). -Adjusted belt tension per video suggestions with...
I figured out my start issues. I also followed the video steps on calibrating the eccentrics. Seemed to help a little bit but still having...
Haha apologies. Thanks, but still can’t seem to fix it. Still starting in material. And now I’m experiencing some imperfect O’s.