Separate names with a comma.
Some features disabled for guests. Register Today.
yeah, I know that the Control software has the XYZ probe interaction, but as I will be returning the BB x32 and Interface, but not the XYZ probe,...
Hi Peter, So in the end the client does not want to continue with this install as-is... I suppose partially (at least) my fault for not seeing...
https://robu.in/wp-content/uploads/2015/12/MA860H-Digital-Stepper-Motor-Driver-ROBU.IN_.pdf page 4 says 5v - 24v signal .. will have to use a...
Leadshine M860, having trouble finding exactly that info... :-/ plenty about max amps, microsteps, etc, even to use resistor if using 12 or 24v...
BB x32 am using ;-) 5v was referring to the old PCB and its separate powersupply (of 5v)
well at the moment the machine has both Y axis drivers to the same signal pin, so I could configure the BB as if dual Y motors, and wire to Y2...
Look like original Leadshine, quality stickers and a (supposed) QC check too
to resume.. the drivers have stp+ & dir+ wired to +ve powersupply, and -ve signals.. this I will swap so the BB is connected to stp+ & dir+ and...
Thanks for the quick replay, what do you think would happen if I leave "as-is" (as mentioned, the actual PCB has the driver signal wires connected...
Hi Peeps, been a while ;-) am doing a conversion of a large old chinese CNC, it has external drivers (with 75v dc) so will be soldering to the...
Hi David, Really interesting info! And as life goes, yesterday I found this article: Phil Barrett's PicoCNC Aims to Provide Professional Laser,...
Hi David, I must first admit that I wouldn't know where to start with that! I'm proficient with hardware, and understand enough software to be...
Morning Peter! Thanks for the quick response as always, yes, I have seen the docs about the BBx32, really a big step up from the original ... had...
Hey guys! been a while ;-) Got a new project, converting a CNC Jiachen JD-1325DSX, it is an old 2008 version, would like to add BBx32 + Interface:...
Hi Peeps, feature request/ change, PLEASE MAKE INCREMENTAL JOG DEFAULT 0.1mm, NOT 10mm!! this has tripped me up several times, as my 'flow is...
Hi Peter! How you doing! I have looked into Plasma, but it does not convince me, the cuts are uglier and need more cleaning, and am restricted to...
Hi People! Been a long while since posted anything! Got a new itch that have to scratch; I want to build a metal laser cutter as I am presently...
OK, so I managed to flash with opencontrol, but, FWIW, using "Nano" did not work, only when using "BlackBox" did the FW flash complete...
Hi, just to clear it up, how did you flash the FW to the Arduino, from the OpenCOntrol FW wizard? Thanks! Andy :-)
FWIW, I just had the same issue and I realised I hadn't changed BOTH jumpers, the Y2-step AND the Y2-dir jumper (it was in X), and so Y2 only went...