Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, the extrusion calculator does a pretty good job. I use it to plan all my cuts and then modeled the whole thing in Blender. I should have...
Hi Alar, Having just completed(?) a 18x18x18 Triple-C-Bot, I can give you a few things to watch out for :-) 1) Keep in mind that along with a...
Hi Carl, I've got my triple-c-bot humming along now, printing PLA pretty decent. A recent customer of mine wanted a part printed in White PETG,...
That's so awesome.. :-) I really like your "manual support" action when the belly bridge printed.. lol
After converting my bot to direct drive (using the STLs from the C-Bot page), I had a number of issues (not related to direct drive, though)....
Looking good! Are you planning on wrapping the hot-block with some kapton?
No, my bed hasn't moved... I'm pretty sure even if the holes in the mounting brackets were large, it still wouldn't move... The main reason is...
Not a really good shot, but I have the socket cap screw inserted from the top, then two M3 nuts to lock the screw in place. Then the spring and...
My build plate consists of (from top down) a large piece of glass mirror, a 1/4" thick aluminum plate, and a 110v silicone heat pad. What I ended...
Adam, Try printing a few large, single-walled cubes (I did 50x50x25 with a single bottom layer, no top, no infill), at both 90 and 45 degrees....
Yes, I shrunk the lip on the groove mount from 5.6 to 4.6mm.
Here are my endstop brackets.... X is on the direct-drive extruder carriage. I'm also attaching a modified carriage front that can be used with...
I think I resolved the vertical lines with adding a 180 degree twist in the long-run side of each of the X and Y belts as they leave the X/Y...
Has anyone seen vertical lines like this before? Does it have to do with the idler bearings and GT2 belt patch? I know there are parts of the X...
I think the main reason for putting the X endstop on the moving piece is to reduce the number of wire runs back to the controller board.
The reason most important for me about using V-Slot over rods is flex. Your print quality will not be as good if you use rods. There are many...
Hi Carl, Yeah, I could probably get away with a simple mechanical switch, but I already bought all these mightyboard endstop switches, so might...
Hi guys, I've been lurking in the shadows, gobbling up all these STLs :-) I've printed out the direct drive parts, but modified them for using a...
You'll still want to use a thermistor hooked up to your control board. You'll also want to use a solid-state-relay and use the heat bed output...
The pictures don't seem to be showing for me, but the vids are definitely impressive! I'm very interested in hearing about you getting Sailfish...
