Separate names with a comma.
Some features disabled for guests. Register Today.
Heya! Actually I upgraded it further but I just never got around to updating this post. :-) The accordion covers came from Aliexpress (I'm...
I just bought a syringe and thick gauge (not too thick) needles, just press some superlube in there
Hi David, Y should indeed be homing with the table towards me. The video wasn't very clear, I agree :) What I tried to show is that, Y doesn't...
Moving 100 mm prior to turning up the power moves 95.58 mm. Turned the power up from 1.9 A to - 3.1 A homing issue remained the same Moving 100...
Motor stays cold, it did not move back to X0Y0 rather X0Y-10. No strange motor noises at all, very smooth sounding. My mill is running on HGR20...
Set "homing seek rate" to 50 mm/s instead of 200 -> no difference; same thing with setting "home locate feed rate" to 500 mm/s instead of 2000 Set...
Right, then I just read too quickly :-)
Although if Accelerations are too high, I should hear a motor skipping, no? I just hear nothing.. I should maybe check if it's even activated at...
Yesterday I set the Y acceleration lower (to the same as Z = 50 mm/s²) but no difference. I'll also check homing seek rates. The flashing issue I...
Okay so, the Y driver is working. That's for sure, if there'd be something wrong there it also wouldn't jog. So I guess the next thing to try is...
Hi David, I set up homing switches again. It's a bit stranger now.. The limits can be triggered by hand. (So they do work). Z homes normally, X...
Hey Peter, I have considered it. But I have 3 external drivers + I have a 48V PSU that I'd like to drive my steppers with :/ That's difficult...
Hi David, Yes I can. Probably due to hardstops being disabled. There's no movement issue to reach all over the bed, strangely enough. I'll...
Hi David, Yes, you are correct. I had the Y directions wrong originally, that has been fixed. Yet the issue remains. I have disabled hardstops,...
Thanks Peter! I'll do that right now :-)
Yeah, It's a RS-CNC32 v2 board. Which is my next stop to ask around.
Dear hivemind, I've got a weird issue that I can't seem to locate. I've build a cnc mill based on the Minimill (linear rails, 2.2 kw spindle,...
Looks really cool! Why the double plate on the motor side?
Yanou Fishel published a new build: A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and...
I wanted to use the minimill to mill aluminum. At first, I had some wobble due to the wheels, so that didn't really work. So I changed it up: I...
