Separate names with a comma.
Some features disabled for guests. Register Today.
Hello sorry for the delay .. in software I use (Aspire Vectric) for the toolpaths, then (CNCjs) to send the code. The whole works perfectly. below...
Hello All, here is the video of my 4th axis in action, I am happy with the operation, if you have any questions do not hesitate. Be careful, as...
Mine works perfectly, but it's a 220V. 8A 400Hz I use the BlackBox, Aspire Vectric, with I can adjust from 5000rpm to 24000rpm. CNCjs with which...
Here it is good, I modify the parameter (P06.01) from 8 to 2 ;-)
Hello All, here I give some news of my assembly VFD Y620-A 1.5Kw 220V works pretty well at the moment except a few points. (1 ) a small default...
Thank you so much I modified some parameters in the VFD and now I can control everything from Openbuilds Control (perfect) I just have to find...
now I can hear the click of the relay when I turn on (Tool On) and (Tool Off) of Openbuilds Control, but the spindle does not spin, I will find :-)
Yes, I plug in exactly like DxN32
DCM ? sorry for my ignorance ...
below my parameters: P00.00 = 400 P00.01 = 0 P00.02 = 1 P00.03 = 1 P00.04 = 400 P00.05 = 400 P00.06 = 110 P00.07 = 40 P00.08 = 10 P00.09 = 4.0...
Depends on - grbl settings ($30,31) -------------------- $30 = 1000rpm $31 = 0rpm - what command you sent ---------------------M3 S1000 - did you...
Is it normal that when I test the output of the BB (0-10v) I only get 4.8v?
here is the link to the larger image my_connect.jpg
Hello, yes it is good to supply 24v, here is my installation and config
Hello All, YL620-A VFD 220V and Spindle 1.5kw 400Hz 8A 220V I connect exactly as on the photos of DxN32, but when I send the command M3 S1000...
Hello, thanks for the answer, my spindle is powered by 220v, is that okay?
Hello All, I ordered the YL620-A with 1.5k spindle to go with my BlackBox, can your parameters be suitable? Thank you in advance.
Thank you for this very useful information :thumbsup:
thank you, you mean you have to handle the switch before powering the Blackbox?
Hello All, The Blackbox Openbuilds has only three axes, Can I do this type of connection with MTS402 switches, in order to have a rotary...
