Separate names with a comma.
Some features disabled for guests. Register Today.
That fixed it! Thanks guys I did not go in and change the $0 ever. How could this change on its own? The unit is set up as a router but do run...
Sorry about that. Here you go. $0=248 ; Step pulse time, microseconds $1=255 ; Step idle delay, milliseconds $2=0 ; Step pulse invert, mask...
Here is a video at 2000mm/sec2 in Y and a second one at 3000 mm/sec2. the results are the same in both X and y. Prior to the issue starting...
Looks like there was a space in front of the 2mm depth when input into the wizard. All resolved.
This morning I’m getting this error when using the surfacing wizard. See attachment
I did a complete cleaning and inspection yesterday and did not find anything. If this were the problem It would be very odd to have both the X and...
Do we have any idea why the speed of movement had to be changed in the settings for the unit to function correctly after months of great service?
I went ahead and changed the USB cable out since I had a new one. It’s 4 feet.
I will make the Thanks for the info on the macro. I will make that change just in case I use it again as I transition to the OB probe wizard....
Here it is. I think you helped me write this one a while back.
Haven’t changed over I guess. I’ve been using the same macro for almost a year.
Ok. No error message this time but when I initiated the z zero macro the z axis shot down at max speed and slammed into the probe. Nothing broke...
I’m not seeing anything out of the ordinary. Acceleration is at 100 mm/sec2 for each axis. That’s where I have had them for months.
I my mistake on not capturing the codes. Will do that next time I see them. I just checked the power supply output. It is 24 volt at rest and...
I have run flawlessly for months with the Blackbox using the OB control. Yesterday I started getting odd error messages when running my surface...
I’m running the Blackbox and do not see that anything is binding. I have lubricated the screw with silicon and it seems to move freely. The...
I have checked the screws and all are tight. To clarify, the X axis is stalling and losing its position.
I continue to miss steps in the X direction at random. This problem has been ongoing for about 5 weeks now. I have tried a new stepper, new...
I sent an email to support. Thanks
I just put a meter on the yellow and green leads coming from the black box and the voltage reading is unstable. It was at 8volts (pot turned all...