Separate names with a comma.
Some features disabled for guests. Register Today.
So this was strange. It wasnt the connector. Think it was interference or something. I noticed it wasn’t fiddling with the cable and connector...
To follow up on this thread. After converting my workbee y axis to screw I figured out there is one screw on the y end plate that pulls it out of...
Looks like my z limit switch is not wired properly. Just hit the metal with it and got the awful grinding noise. ☹️ Looks like a bad contact...
Right, so they should only stop the machine when homing. I'm assuming I can leave the line to H0 while homing and it wont ignore the the switch...
Hi I've recently converted y axis belt to screw and re-did the setup , upgrading of software and the axis testing. After disabling the "jog...
Thanks. This is the orientation of the board w/r to the machine. For some reason the earlier iphone pic uploads are all rotated wrongly....
[ATTACH] Ok after 6 weekends being fully booked I can pick this up again for the next couple of weeks. So I screwed on a practice MDF board on...
OK, so I got the face operation for my spoilboard surfacing setup. I've offset the 15mm on each side ryan suggested to avoid dust shoe clipping...
OK, my first instinct is to pick Fusion 360 as I'm used to CAD. Solidworks has CAM, but looks like no-one is using it in the hobby cnc community...
Hi I’m a bit bewildered by the options and what is most suited for different needs and which ones need particular post processors for the duet...
Hi I’ve been searching in forums for hold down clamps and spoiler board and as far as I can tell there is a lot of reliance on printing /...
Thanks Alex. Much appreciated. I think in this case I’ll just use the tape method, but I’ll keep your offer in mind if I can’t avoid having to...
OK, got the spoiler board attached , router mount and router is in place and made sure the router cable hangs overhead using hooks on my ceiling...
OK, moving the spoiler board on the machine pushed it out of square again a little :) I did follow the suggestion about using the spoiler board...
I’ve resolved the x-axis screw wobble. Needed to loosen the locking nuts and could hear tension give way. Temperature is changing fast, so that...
Hi Alex So this is my task list: 1) fix significant wobbling in x-axis I noticed after writing original post. Ryan sent me some suggestions....
Hi, So I've assembled my 1000mm (screw) x 1500 (belt) machine and commissioned the duet controller. Everything seems to work fine so far. After...
OK, managed to get the frame square. Still waiting on my spoiler board delivery, but tried some of the suggestions, and couldn’t get the...
Thanks for the tips. I haven't gotten a spoilboard yet actually. How do you actually fix the spoilboard onto the extrusions? There isn't...
Hi, Assembled my workbee (1000 x 1500 screw x belt). Noticed its off square a little. Should have noticed earlier I suppose. Anyway,...