Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the tips, David.
Awesome! For BlackboxX32 based on ESP32 for grblHAL with 4th axis Made possible by Swarfer GitHub - swarfer/GRBL-Post-Processor: Start...
On a related note, is there a released or beta OpenBuilds F360 post that supports a 4th (rotary) axis?
Cool. Thanks!
Thanks Peter. It looks like the motor is probably a LDO-57STH56-2804AC. Rated Voltage 2.5V Current /Phase 2.8A Resistance /Phase 0.9 Ω...
Is there any technical reason (outside of mechanical fit) why the Vortex Rotary Axis couldn't be added to an Openbuilds machine with a BlackBox X32?
I’m not sure what you are trying to do but perhaps the function you are looking for is Coincident. This can be used to join line endpoints for...
Thanks Alex/David. I'm not very observant. ;) I'll try the new post...
I notice some of the settings are no longer present in the V2.0.10806 NC Program Post window (see attached). e.g. Has Speed Dial, Spindle on/off...
My design FWIW. :). Modeled it in Fusion 360 to determine the cutouts and make the graphic.
You refer to the 5th bullet but you seem to be talking about the 4th. Assuming the 4th, you could use another short 2D Adaptive operation with...
I think you know as much as I do about chamfering at this point. This isn't an operation I have needed to use yet. :) FWIW, I can make some...
It sounds like you might be changing direction on the wrong operation. You need to change the direction only on the chamfer operation, not on an...
Please review my edited post above and see if it fixes your issue.
Rhett. I originally wrote this - "I think the CAM program is executing as specified (see trial image attached). The engraving tool is centering...
I built this for a RPi CNC FWIW...
Commercial machines are earthed using a rod similar to what you describe in order to provide the lowest possible resistance to ground. Your CNC...
I think this symptom points strongly to static discharge as the trigger of the fault. FWIW, the common ground point I used was a copper water...
Hi Tom. I think Gary lists some very good items to look at. It could be that some of Gary's points may have helped solve a similar issue that I...
Acceleration can be set surprisingly high before losing steps. FWIW, commercial machines are set with acceleration as high as practical. Low...
