Separate names with a comma.
Some features disabled for guests. Register Today.
Wow. Sorry I missed the trouble shooting....I’m glad you got everything working. Trust me, I went through all the same steps....like I said, it’s...
As long as you follow the link in the o.p. just compare the settings that I listed to the settings from the link. I have parts arriving to fully...
yes sir :thumbsup:
Im also curious because I’m under the impression that the m3/m5 jumper has to be installed for the spindle to run then would have to be removed to...
I’m glad to help. I know exactly what you mean. I had searched so many resources to get it right. I’m putting parts together for a xyz plate and...
[ATTACH] [ATTACH] and m3/m5 jumper in BB
These are the settings I changed from factory after initial reset on the YL620-A 110V VFD to run a 1.5kw spindle using the BlackBox 0-10v to...
I would! Give me a few and I’ll type it up. You want a new thread, or in here?
Jump XGBD and FWD then on “toolhead” plug on BB pin 1 gnd to gnd on vfd and pin 4 0-10v to VI1 on vfd and it’s M3/M5 in the BB
Actually, black to gnd and red to VI1 works beautifully
I’m currently running a 1.5kw spindle motor with the yl620-a vfd and would like to upgrade to a 2.2kw spindle. Can my current yl620-a power the...
Nailed it. Thanks!
got my vfd/BB communication all dialed in (super pumped), but the spindle does run backwards. Is the above fix for this good advice? Spindle runs...
felt confident that I had read enough documentation to start wiring the vfd without running into problems. But I popped open the front cover on...
Nope. Super easy to thread through the blocks.
Triple checked couplers....all tight
I’m in the garage right now and discovered that Y1 comes to a stop a lot faster than Y2. Any ideas? EDIT: I lowered the axis acceleration on all...
I bought it as a kit WorkBee CNC Machine - 1500 x 1500mm - Maker Store USA Would it be simple enough to change the Y axis to belt if everything...
Lead screw, 1500x1500, Blackbox, open builds control and already checked couplers...all tight
Ran the hello world program for the first time today and after it finished Y2 was about 1.5 inches behind Y1. Could this be due to current...
