Separate names with a comma.
Some features disabled for guests. Register Today.
well the laser has been down and disconnected for about 48 hours so hopefully its fully drained... i have linked this form to my friend hopefully...
for my friend's laser that is what i am seeing and i saw the schematics for a 4 prong and it clearly identifies the 4th as a ground ... but if...
[ATTACH] here is the look of his power supply [ATTACH] here is the wire that is hanging out on its own... its soldered to the tube but has no home :(
ok... but it seems like all the ports on the left side where we would connect the into the PSU are occupied... i understand that on the right side...
***update*** he has this no name power supply for the laser (looked all over the place for a wiring schematic) it has 3 slots on the left and 6 on...
good day my friend has a 60Watt tube laser cutter recently he has changed the tube and he has discovered that the negative wire has come undone on...
yeah balsa and some birch ply that i am sure with the right bit and speed i can cut through it like butter... and if anyone can point me in the...
well all i would really need is 2d because we build up the airfoils with main spars ect... and all i cut is bulkheads and formers... other then...
that conversion looks like fun but for a rookie like me that is just looking to cut airframes out of balsa wood that might be over kill... plus...
what i meant was that with a router & bits all that is needed and the frame kit which i mentioned the one i am aiming for due to size requirement...
K40 is to little of a working area size.. i need something around the specs of the acro 510 series which is a 30 X 12 bed area... reason for is is...
co2 laser that is out or reach for me.... multiple passes are not an issue.....but it sounds like i might have to invest a little bit more $$$...
/ so something along the line of The Endurance 10 watt+ (10000 mW) diode laser add-on for 3D printer / CNC mill. would help out with the...
i take it that will replace all .. motor control and laser control correct? again a newbie here so sorry if i am picking it apart ....lol
Hows everyone doing ? Well i have decided to step into this and build a Acro 510 which is the 20X40 unit and i know thats the easy part and the...