Separate names with a comma.
Some features disabled for guests. Register Today.
Hi I have a Blackbox controller and 4 nema23's motors I would like to depart with. All in great working order. If you have anything that you might...
Thank you, that is pretty cool. Maybe I can find someone to make the parts for me around here. I don't have a way to do it myself.
I realize this upgrade was started sometime ago. I'm wanting to do the same thing type of upgrade to my "workbee" using linear rails. Anyway of...
I have a black box controlling standard nemo motors. I would like to swap out the motors for closed loop motors. Would I be able to use the black...
Apparently I still have something either wrong of I just can't figure out why this is happening. 1 photo 1, I have the router just off the table...
Excellent job so far. The cutting of the plexi looks great and seems to me like it should work well. That x gantry of yours moves pretty fast in...
Thanks for the help. It’s now making more sense on what the machine is doing and the work and home commands are doing. I do think I have...
Thanks, will do on the reading. It just seems odd to me but it’s probably from the surveying i do. We like to work in the +,+,+ coord system...
Thank you I'm thinking there is something else here going on. 1st i have the hard and soft limits enabled (see jpeg1). i also have the max travel...
I'm guessing i need to find a better on line tutorial on this. So this time i the home button (house) and the router went to the limit switches...
Not sure... I set the router in the corner and in the control sw that this is 0,0,0. use the probe to find the material 0. Sounds like i'm...
I realize you have better things to do. I really appreciate your help. I'm finally getting around to using this router but there weird things...
soft limits enable = disable hard limits enable = enable homing cycle enable = enable homing direction invert = default limit switches installed =...
I reset the controller. I put my setting back in and re ajusted the travel directions. i marked a known point and told the control sw that that...
You are correct. i have the setting for the prob at 25mm. so after it hits the prob and retracts it now thinks it is 25mm above the work surface....
I brought the router to the origin corner, just before it hit the x,y,z limit switches. I told the open builds control sw that this was 0,0,0....
Greater than. Probably a good 25mm. As in i can still go up from z=0 about 25mm after that it would hit the limit switch.
So i tried the router again with the new post processing file and it did the same thing. The router at 0,0,0 and when i run the job the first...
Well, i was able to get the cloud assets turned on and uploaded the cps file. that seemed to have worked. When i got done post processing the file...
First I do not have any assets folder so i'm using my "personal post processing" location so i cant upload to the cloud. using the personal post...
