Separate names with a comma.
Some features disabled for guests. Register Today.
Evening All from my garage... Ok... I'm feeling rather ... dumb!!! two errors 1. in the new ooznest web interface there is a customconfig...
Het @Alex Chambers cut one is the first calibration cut. the measured dimensions are after the 1st cut using 400 steps per mm. So the cut should...
Afternoon All I have been trying to calibrate my Oooznest workbee screw drive. Seems I am chasing my tail,each adjustment I make throws the cut...
Evening All... Apologies for the delay... sadly the calls of looking after children and work, well mainly work got in the way of me testing. So...
CHeers Alex, Much appreciated. Time for a beer... :-)
Evening Alex, Rob. Thank you for your advice so far... seems i am going round in circles. I do know if you use F360, but if you do I have shared...
Hi Alex and Rob.. Indeed this seems to be the case, however, no matter where I set my orientation on the XYZ X always seems to go positive. In...
Afternoon All. Firstly I hope you are all safe and well in this challenging time. I have a Workbee 1000 x 750 screw drive from Oooooznest. I...
Ok.. So not sure what went wrong, if it me, feeds and speed of the alloy is to hard, bu judder, deflection and I have to stop the job. some...
It seemed to be the most economical option, I spent a few hours trying to buy the stuff...
It was an ebay purchase: Aluminium imperial flat bar 6082 upto 6" (152mm) wide + free cutting & p+p | eBay
@Alex Chambers - Ahh yes possibly the most important info missing: Aluminium imperial flat bar 6082
Fine People fo Open Builds... My weekend plans have gone slightly amiss dues to having to take my daughter to A&E, the right of passage I...
Evening All. Last weekend I have installed a more robust dust collection in my garage. I have a dust deputy which was attached to a plastic...
Hi @Alex Chambers. Sorry today was supposed to be an easy day, instead, I have just managed to catch up on posts....so I can share my Fusion...
Hi @Alex Chambers - whats the malt? I about to embark on a little sailing trip around the Scottish isles for some whiskey collecting... Cheers...
yes it moves when i move the machine around..
B.T.W the fusion post processor v1.0.1 has a true arc section, I recalled this on an earlier post and thought this may be related...
Evening All.... sad news.. whilst the tool path seems correct on the X and Y, the Z axis is not moving. When the job starts the Z axis stays int...
ps Jameson is also rather good...
