Separate names with a comma.
Some features disabled for guests. Register Today.
This issue was reported several times, although I did never encounter it myself. Looks like it results from very small arcs which are generated by...
I think you should start by reading the Wiki on GRBL : Home · grbl/grbl Wiki · GitHub
Custom Post-Processor for GRBL The 'Generic GRBL' Post Processor in Autodesk Fusion360 isn't really well optimized or adapted to GRBL, so I...
Question about using RS232 io USB : On my GRBL-Arduino shield, I added a RS232 driver (built around a MAX232) in order to be able to communicate...
Setting $100, $101 and $102 is no guessing, but needs to be according to rather simple calculations : Case 1 : timing belt : * determine the...
You have to go step by step : 1. Is the XPro controller getting power (leds ?) (seems that is ok in your case) 2. Does the XPro respond when you...
Thanks! all good to know. My problems with RS232 are most likely not EMI related, as I can reproduce them with steppers and spindle-power...
That is definitely the way to go - I will spend some thinking on this and send you a proposal for the future GRBL on ARM.
Ok, I am aware of this. Made some small calculations though : suppose a 3D carving would result into 1mm segments each segment could be...
I still think it would be useful to 'log' what caused the problem. Initially I got false triggers of limit switches, but by the time you can look...
I volunteer to help. Testing, Documentation, ...
GRBL changed it's interfaces baudrate from 9600 (V0.8) to 115200 (V0.9 and up). Is there any more info on why this was done ? I am interfacing to...
Hey Jonny, could you share a bit more of your expertise... Can you explain a bit why ? I thought wood usually requires high RPM Could you...
Hey Josh, My power supply is 24V 16.6A ie. a 400W This is sufficient for the worst case scenario : 3 NEMA23, each 2 coils, each coil max 2.5A =...
Hey Justin, They are the same kind of software. If I would list all the SW you need to do CNC milling, it would look like this Make a design in...
Yes I'm using NEMA 23HS22-2804S on the X and two of them on Y So far I only tested with X and Z. It is taking a lot of testing, measuring, trial...
Hey Akfreak, I think GCode console is the same as Serial Port console: Chilipeppr sends GCode over the serial port. If you type GCode into the...
Before finetuning my xPRO settings on an OX CNC, I decided to upgrade to the latest version of GRBL. following along the instructions on the Wiki,...
Hi, I'm not from Florida but I'm willing to assist you with the Sketchup or CAD models. I also have a question: isn't a lasertube sensitive to...
Hi Andre, sorry to hear that. To make it clear : I am not affiliated with V-slot Europe, I was only responding my (limited) experience as a...
