Separate names with a comma.
Some features disabled for guests. Register Today.
Alex, I used my geeetech to build a much larger 3d printer using oak kitchen worktop and 42mm stainless tube. I can only suggest you try PETG as...
The chiller worked out more than a radiator, pump, reservoir but it is all self contained and makes lufe simple.
Alex, not sure what you mean by "It's not a good idea to solder wires to crimp connectors (or to "tin" wires in screw connectors) - the...
Same...about 10 hours. All went very well. The kit I think is very well manufactured. (Although as a automotive engineer I could see eliminating...
I would advise based on my findings to take each wire out of the white connector for each motor. Thus is easily done with an electrical...
Just be warned...3 out of 4 stepper motor wires had failed crimps at the white connector end going on to the Duet board. If you have any issues...
Yep...got both...
Top one was a 6mm ball ended mill and bottom one was a 6mm end mill. I used 250mm/min & 300mm/min on these two. I tried faster but produced a lot...
Very happy, first 2 jobs with Fusion 360 on scrap timber...very pleased
Just been and checked...my user interface does not have that tick box...so I added S1 in config g
Alex, I looked but could not see a box to un-tick in Duet web control so opted for the config g option instead. Can you post a pic of the page...
Alex, I have just had a look through the Duet web control settings. I found this setting in the config g folder... M564 HO This is what the...
Alex, Fixed my Fusion 360 post process issue...many thanks. Am I right in assuming it is a line in config g that you are referring to...
Alex, Thanks for the quick reply. I will have a read up. Don
Hi, I gave just built a 1M x 1M screw Workbee. Can anyone tell me what I need to do with the Fusion-v 1.0.1.zip file? WorkBee Firmware...