Separate names with a comma.
Some features disabled for guests. Register Today.
N No, but I have noticed this error intermittently while jogging
I am using the xtension limit switches
It has been working fine for the past few months, I checked all the wiring and made sure everything was tight. I checked all the limits in the...
I'm just getting back to using my machine after a layoff and now my machine won't home. It goes through the motion on the z axis, it starts moving...
How did you ground the hose?
A little update on a very strange issue, when it was stopping I was surfacing my spoilboard. Since I finally got it completely surfaced by...
Thanks Alex, router is 2 months old, and I have the router and shop vac plugged into an iot relay. Do you think the brushes could have worn out...
Router on
Ok so I have had this problem before and it was due to a loose limit switch wire. I have checked and re checked all limit switch and motor wiring...
I ended up loosening the front and back plates completely and then pulling the gantry forward and tighten it down, then did the same for the rear
I do but they are running the same version of windows. and my laptop is actually faster but the desktop has a better gpu.
none of them ever crashed per say. on .150 the stuttering never showed up with 3 days of working and leaving open. the UI and overall feel just...
Ok so i had time to test it out .150 seemed ok just a little sluggish not sure why. .152 was much like .207 but actually took longer to show...
I have to run a few projects this week, so i can certainly help. just a little more info, i was originally running on an older laptop with Linux...
I was having this same issue with 1.0.205. I was running a 2 part code file when in the middle of the 2nd part it slowed down to a crawl and...
I seem to be a little out of my league. After numerous problems getting everything square, then figuring out why it wouldn't complete a surfacing...
I just finished building my workbee 1010, and im confused on where to mount the spoilboard. does it just lay in there? or do i have to get more L...
The frame isn't fully built yet. I am following the openbuilds video and am at the squaring stage . When I pull the gantry to the front, the left...
I for the life of me cannot get the frame square on my 1010 workbee. I have tried just about everything it has about a 1/16th of an inch gap on...
All ready for the rest of the workbee to come together
