Separate names with a comma.
Some features disabled for guests. Register Today.
I do and have been for a few years now. I have sw 2018 with hsm works. hsm uses the fusion posts so you can use the same post as you do for...
I adjusted accelerations and jogs down and still moves short of the 100mm
Mechanically its good i looked those over. I will try and adjust the acceleration
Im at a loss. when I run the calibration wizard I get it spot on to the 100mm it moves. I go and jog it 100mm and it goes less than the amount i...
I have a black box its a little over a year old. Im having the great "disconnect" issues. I am wondering if its because the female usb slot on the...
My bb is a year old. More and more it disconnects from my computer. It’s win7 64 but. I already have disabled the usb going to sleep. And it still...
Thanks, Any chance can you send a pic of it?
So i have one of the original bb's (the one where you had to assemble it). I was wondering so I can use a "hi-torque" stepper with higher voltage...
Which controller software is that? I assume you just send your y to the axis of the rotary prior to flipping the switches? what rotary unit is that?
So im thinking about re-designing my home brew. specs are as follows: bb for controller. 1605 ball screw (2 on the y, 1 on the x, t8 screw on the...
I have a custom machine using 1605 ball screws, black box and open builds control. I do my work in solidworks or fusion. I cam in fusion or hsm...
So im trying to fine tune my steps my machine i have 1605 ball screws and try and cut a square that is 1.25" x 1.25" on one direction im getting...
Even on different circuits? Do you know what would cause this all of a sudden? its been working good for a year.
So i got an odd issue that all of a sudden has started. When I use my vacuum to clean up chips while the cnc is running it makes my usb drop out...
Attached is what my machine looks like. It's mgn 15 on the rails and 1605 ball screws. All of a sudden I'm having an issue. Yesterday I had...
I will give that new post a try. Just as a follow up i re-did the cam work using solidworks and hsm works and it worked great. same post as i was...
This is the one im using. I have the full version of f360 so i have the older one [ATTACH]
Im trying to pocket some text to do an inlay. Its programmed in f360. As its clearing the pocket i get this error? any way around it?
Im using fusion/hsm works (in solidworks). Im trying a 2 sided cut. My finished product is centered in the stock material (x long side and y short...
Im thinking about investing in carveco. I use open builds control and black box. Anyone out there use this combo? will their standard gbrl post...