Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Alex. I love this CNC so far. I cant wait to get my larger version of this design complete. The great thing about this design is that i can go...
I decided to build this CNC using the Crawlbot as my inspiration. It uses double 6020 vslot with a slightly modified OX CNC plate gantry. The Y...
What are you using to spread the light out evenly through the back of the screen. I have been rounding up parts for a smaller version of yours...
On the smaller CNC The X rails are 2 x 1000mm 60x20 and the Y are 250mm 80x20 (a 500mm piece cut in half) The Skateboard Wheel centres are drilled...
Cool. If all goes well, I should have some video of it in motion soon. I have gone a little crazy and have recently attached a 8inch LCD (to view...
I used "shf8" 8mm rod holders not only to add strength, but also as a spacer if I ever decided to run the motors and belt on the inside.
Hi Adam, Unfortunately in my setup, the forces of the router will be too much for just motorized skateboard wheels to rely on movement in the...
Yes, I made reference to it in an earlier reply. I have been following the project closely and only come across the Crawlbot design, because the...
Kevon Will not be any different to any other machine that runs a belt system. The wheels are only a guide, the movement and torque is from the...
On my larger gantry, I will be running a 10mm or even 15mm wide belt on the outside (but haven't quite decided on belt type, pulley size etc as of...
When you mean slip, do you mean lift up? Or will it slip in the Y axis ? On the Y Axis, there are bearings that run along the edge of the MDF (2...
This CNC will have a vacuum system attached like my others. I have never really had a problem with large chips when milling, but its not to say it...
Craig published a new build: Building a couple of CNC's based on the Crawlbot Read more about this build...
