Separate names with a comma.
Some features disabled for guests. Register Today.
Everyone was right! I'm almost to ashamed to post my mistake. But here it is. My stock board in set up and what I cut to carve out the project was...
That was the first thing I checked. I've carved this project in a larger version and had no problems. With this one I took the same file using...
I opened several different files and Control has shifted all of them 1" (25 mm) to the right of the set X work home position. Also as I posted...
Just let Control Software update. Homed machine (work). Then set my X and Y home for the project. Loaded my Gcode file and it started carving...
Wow, what a surprise. When I connected the IOT relay to my X-controller and started my latest carve, something unexpected occurred. I turned on...
Alex, I opened the Grbl_mm.pp file in Notepad. I don't see any (+) in front of anything except in the title of each section and they all have (+)....
Alex, my work flow goes like this. I use Vcarve Pro, then save my tool paths with Grbl (mm) (*.gcode). Then I use OpenBuilds Control to run the...
Peter, that's way beyond my skill level. I was hoping that there was something in Control software that could be set to auto start, then stop the...
Thank you for the reply. I use Vcarve Pro for all my projects.
I'm using OpenBuilds control and the IOT relay to turn my router on and off. Is there a way to have the router start up automatically when I...
My machine is a WorkBee 1010 and the router that I'm using is the Makita RT0701C 1 1/4 Compact router. I think it only weighs 3.9lbs. It has...
Gary Caruso, Thanks for the advice. I'm going to try doubling my plunge rates and increasing my feed rates. As for my "acceleration set in GRBL"....
Can you provide a link to article?
My machine is the WorkBee 1010 with the Makita router. I also use the X Carve, X Controller to run my system.
The files are pretty large. The last project I did was "The Last Supper". The roughing gcode file was 888 KB, and the finishing gcode file was...
Yes Sir, homing is indeed set up. Thanks to the people at Open Builds and Peter Van Der Walt, my machine is fine tuned and running like a fine...
I'll give that a try. To tell the truth I have thought about it, just never did it. I've read all the literature on "speeds and feeds" and have a...
Only solution found was to plan roughing toolpaths early in the morning so they could be monitored. That's the more aggressive process in the...
In your "screen shot" see the area where you have the Red "X" , Green "Y" and Blue "Z" ? To the right of each is a drop down arrow. Click the drop...
Well, I gave up on bCNC. Just could not make it work. So I decided to try UGC. That seemed to be the ticket. Was easy to install, and will handle...