Separate names with a comma.
Some features disabled for guests. Register Today.
Hi All I have a object to cut that I imported to CAM from openbuilds and when I generate the tool path it adds a random path at a certain point....
@Peter Van Der Walt the squeal is still there even with the new box but much less. The machine has now been running for 2hours and so far so good.
@Gary Caruso not sure how I can pull the clean settings off the black box. Tried to copy it from the grbl settings but then it does not include...
Thx Peter I have and they quickly responded. Thx.
I purchased a black box to replace my arduino and grbl shield. I am running nema 23 stepper. I installed the box last night and set all the...
Okay blackbox arrived. Busy testing but having an issue. Both my Y axis nema 23's are making a squeal sound. X and Z is fine. When I plug x or z...
Okay I got hold of one in the UK so might take a while to get to Australia.
Here is the gcode
Hi All I eventually got to remove the power away from the low voltage, and now it has gone down hill completely. Could not even get 1 good cut....
So did the same cut over the weekend and failed again at exactly the same spot. So I will now need to remove the power en then see how it goes.
@Alex Chambers that is an idea. I will have to make a plan as my machine is enclosed for sound damping as I am in a very tight residential area. I...
HI All. I fixed a few of the issues you all raised and I could immediately see and hear a difference in the machine. Changes made: 1. Fitted...
Okay I will need to fix that. My power for my router runs with the stepper cables in the same track.
My head is going towards thermal cutoff, as I do not have fans over the drivers. The drivers are A4988. Why also did check the wiring and did look...
HI All. I have an issue where my machine will go off path at random times during a gut but mostly at the same spot. Machine is a GRBL with...