Separate names with a comma.
Some features disabled for guests. Register Today.
So I installed the black box and things are looking up. I ran a program to check that all is working and it doesn't shut down when I turn on the...
I have to get my Plasma operating. I will build a new case with through case plugs (like for audio plugs). I have purchased cable suppressors...
Will the new black box solve this problem. I sent back to Mike my V3 that i bought with my machine as i couldn't get it to work so could I up...
The box has circulation vents on each end would that also cause a problem
Well it might be a toss up. Yes I have a really good plasma cutter that I can cut up to 16 mm plate. I put the machine in a metal box made for...
Yes the $4=1 is correct. I do have the SSR working. with the Ohm buzzer it shows it turning on and off. .Once I connect it to the machine, it will...
Thank you, I am using the Mechanical Relay and I didn't have the 5v wire connected to the board, now I have three wires connected. I'm trying to...
yes I do, and it has 4 volts coming into the SSR from the spindle side of the board. the light turns on showing that it has current to the board...
I will talk to BOB/CAD about turning on m3 and m5 but thous are the same SSR that I purchased. I have one SSR connected and the ground is...
When I run OB program with three circles the light on the solid state relay comes on when cutting and there is a solid 4v but no action to the...
Now we are getting to the problem. I made an other program File 4 which is 4 holes 25 mm radius. the first hole has 32 segments the second 64 the...
Using the Open Builds CAM (OB) in the first file (2) when running the machine it will go to the first hole then the Z axes will lower and send a...
When the head moves to the starting point the Z axes should go down to the material and at that point it starts cutting and stays on until it gets...