Separate names with a comma.
Some features disabled for guests. Register Today.
I will like to trade this controller for a couple of openbuilds Xtreme Solid V Wheels ( > 15 pieces). I have other things I can offer.
Are four linear rails really necessary for the Y axis? I believe a lot of money can be saved for the same performance by going with a single...
I used one of my feeler gauge to adjust the spindle and tested it on another MDF. Results were much better this time. [ATTACH]
The Z and X are not perpendicular. I used some shims on the lower part of the spindle. However, it seems there are a bit bigger than need. I will...
I have made some adjustment to my spindle. I will test the tomorrow and report back.
I was running pocketing along the X axis. That is what is worrying me too. I have put it up for sale. I will be downgrading to a 800W water cooled...
1.5KW
Thanks. I will get a very good square and tram the axes.
I try surfacing a piece of MDF to test a new bit I bought. It seems some layers are slightly higher than others after surfacing. Any clue what the...
I just finished my first mill on my CNC. In as much as everything went smooth, there is a slight issue with the part I milled. [ATTACH] As...
thanks, for the info.
Has the size of your working area changes after the upgrade?
[ATTACH] This is my simple solution. Once I get a 3d printer, I will go with a different solution. This has helped me to calibrate the feedrate...
I just cut a ballpoint pen into two and put the spring from the tip at the end.
my pen is spring loaded.
I decided to re-calibrate my X and Y axes and also optimize my ESTLCAM settings. Machine was able to draw this Mickey Mouse with no issue....
I have done that. But, I will do it once again. I bought a digital indicator to help with calibrate the whole CNC. I am putting together a dust...
[ATTACH] This is the current state of my CNC. I am using a spring loaded pen to test and calibrate the machine. Also, I am using ESTLCAM with an...
I hope you will upload the CAD files for the plates and the BOM when the build is completed.
Nice looking machine.