Separate names with a comma.
Some features disabled for guests. Register Today.
Another Approach i thought of would be to make yourself a wall mounted or free standing White LED Light Box with a White Perspex Front &...
Why Not Just Use a Adjustable Spring Loaded Diamond Drag Tool , There are quite a Few that just fit into a Standard Collet , I would think that...
Hope you Find them Useful GrayUK Please Note Both of the Case's are designed for people who Use Standard I/O Header Pins with Wires Soldered &...
I Thought i would share my 3D Printable Designs for : Arduino Mega 2560 Cases that i made for my CNC Router. They are Designed so no supports...
Hi David , Gary & GrayUK This Evening I Reset GRBL 2560 to the Default ( No Inversions ) & Checked to see which Motors Needed me to do the...
Hi David , Yes Your Correct my Steppers Phases 100% do need swapping Around to save me doing the Inversion in software. I Think this would...
Hi David , Yes the one with the 2 Stepper motors is the Y Axis - Next to the Machine is where i am planning to Fit the Upright Dust & Chip...
Hi David :) That's a Fair Comment - And i can see why your pushing for everybody to adopt the industry Standard. It would cut down on confusion &...
Hi Gary , The Results are in :) I Have been up to the shed this afternoon and booted up the PC & checked to see if Status polling is enabled & it...
Hi Gary - Many Thanks for all your time today trying to help out :) That's Well spotted ! - I Presume this is polling for checking I/O every...
Hi Again Gary :) When i first wired up the steppers to the Drivers & Tested it via Jogging buttons Z was Correct Moving up & Down as it Should X...
Hi Gary - Thanks for the side by side comparison , I Just been looking at it and comparing which pins that would need to be changed. Your Right...
Hi Gary - Thanks for the Really Good Idea , Had not thought about Estlcam Firmware ! I will Certainly try this if i can not succeed to get GRBL...
Hi Gary Thank you very much for taking time to clarifying the $23 setting , That makes me very happy as i Really did not want the home position to...
Hi David First off Many thanks for taking time to try to help me out on this niggling issue The Z Limit switch does appear to be working as the...
Hi , First off Thanks to GRBL Software Engineers for a great bit of Control Software My Set Up : I am Running GRBL 1.1f on a Mega 2560 - Was...
All of what Gooshpoo said is Spot on with his run down of the comparison between Routers & Spindles :) But Also the typical 1.5KW & 2.2KW...
Hi Daz , been following your videos for a while on the Spartacus Design process & Build + also the Anodising ( Very Interesting ). I also have the...
