Separate names with a comma.
Some features disabled for guests. Register Today.
Checked all the cables last night, nothing looked out of place, worn or loose. I did test it with the old controller board (XPro v4) and noticed...
I removed all the connections from the BB after the incident but still couldn't get to respond. Does the red light in the USB led tell something...
Yes, will do. But does it sound like something that is recoverable, or is the BB fried?
I moved to a new workshop and finally got my CNC assembled. During testing, while moving the Z up, the connection between the Blackbox and PC died...
Did what Peter suggested, and moved the power cord to the dust hose. No errors so far, thanks! After the last glitch I had lost all of my GRBL...
I have no idea if the power cord on the Mafell is shielded, probably not. How big a distance should there be between the high voltage & low...
I have a Mafell FM-1000 as the spindle: FM 800 / FM 1000 (PV) / FM 1000 (PV) WS: Mafell AG, I'm using the power cord that it has. It's not...
I got some 12 mm aluminium plate for the Z gantry and a "Funssor 43 mm Kress spindle mount" for the mount. I drilled one of the mounting screw...
No, ended up upgrading my spindle mount, which allowed tramming with "normal" methods, shims etc.
On my DIY Ox-based machine there's a problem that only occurs when the spindle gets bigger loads. Normally everything works fine, but on deeper...
I could workaround those issues. I often have the z0 of my models set to the bottom/spoilboard surface, and if I don’t, I could manually enter the...
On some commercial machines I’ve seen have a static z-indexer/probe, a ”push-button” -type plate near the 0,0 of the table. Seems handy. Like...
Hi all, managed to upgrade my custom OX build to use a rack & pinion transmission. The accuracy improved A LOT compared to the old GT3 belt...
HA! Moving all commands to new lines solved this great mystery.
Trying to get my XYZ probe to work. I have the xPro v4 controller, grbl 1.1 and i use OB Control as the software. I copied the macros from...
Oh well, it didn't work. Basically the main clamp needs to be 100% tight and when it is 100% tight, all the micro adjustments you could do with...
I need to tram my router/spindle to get it level. It's not far from level, but I can't find any simple ways to adjust it all the way. So I have...
The first time the "usb eats too much power" happened I had a large usb hub -type adapter connected, which was noticeably warm. Second time I got...
Ok, thanks for the information. I just noticed yesterday that Control's flattening wizard adds a "framing pass" along the Y as the last move. When...
Don't know if it's an issue with CONTROL, Grbl or my xPro v4, but there's a few problems I've ran into a few times randomly. - My macbook pro...
