Separate names with a comma.
Some features disabled for guests. Register Today.
Last night I decided to go back and mess around with the machine again and I found the backup file from the gbrl and was working again, now I have...
I had this alarm before and was caused by magnetic interference which I resolved moving the routers cable away from the other cables and installed...
Does the interface have the option to surface like the openbuilds control software?
I just realize after installed blackbox 32 and interface I never changed the machine type on my CAM software, they have Openbuilds listed and will...
Found the problem.....user error!!! I had the steps wrong and I used the wizard to calibrate. Z moved 5 mm when should be 20mm and the other axes...
After done probing I get this: X -0.02 Y -0.02 Z 14.00 PS Just added pictures of the interface screen [IMG]
I didn't open a ticket because I believe I missed something on this, when I start a job using the interface and after probing with xyz probe the...
Going to bestbuy to buy the cable and I will keep you posted.
Got both the blackbox32 and interface and the blackbox works with the laptop but the interface makes a buzzing sound anytime I press a button like...
I was reading about the chinese laser drivers and.... I probably fried my diode:))) so now I ordered the 4 diodes and the resistor. I still want...
Ok got the laser working raising the voltage on the laser driver but I'm getting only 10 volts doesn't go higher and the laser only lights up once...
The circuit I'm using is this one without the stop ends.[ATTACH]
Received the part I needed for my laser installed and the laser is not working (tested before so works when connected directly to the power supply...
That's a good idea, thanks I will try that.
Got my machine to work and I didn't connect yet the laser because I'm waiting for a part but I connected a pen to see moving, can we have a pen...
Got the steps/mm done and I have no jumpers on the cnc shield and I disabled the Z axi, but anytime I try a test file (the laser is not connected...
I built an Openbuilds Acro (1000x500) with a 1.6watts laser, I'm using the arduino uno with the cnc shield but I'm having hard time to configure,...
Thanks, Im going to try the support community and reading the docs. PS thats what I though I need the port 8000 open and barracuda (firewall) is...
I ordered the board from banggoods and will take a while to get here, I finished my build and besides waiting for the board I was trying to find...
I have a 445 nm 1.6 w laser and doesn't have the driver board, came with a power supply.