Separate names with a comma.
Some features disabled for guests. Register Today.
on opening the file I notice that the penetration points are in the material you are keeping. ie the little green lines are in the part not in the...
please use the openbuilds postprocessor docs:software:fusion360 [OpenBuilds Documentation]
...negative Z value in Post Options. See Search Results for Query: fusion G53 | OpenBuilds Should help, but wont ever be perfect (analog signal...
Hi all, i have lots of issues going on, and I can't resolve them myself. I have Stronghold Pro 1000x1000, Blackbox X32 and watercooled spindle. I...
Correct, needs a HOME up and away - get the switches, or learn to fake it :) But really, get the switches. Setup Homing. You'll just have a much...
My issue is, I have my machine zeroed out where I want the job to start, As soon as I click run job, The z axis should raise to move to its first...
it caters for router, laser and plasma machines it fixes small arc errors it reinserts missing rapid moves when needed it does not use G28 but...
Just to make sure I shut everything down and turned it on, Homed it, probed it and ran it. It looked like it was going to work but it only made 2...
For starters, I installed the latest OpenbuildsFusion360PostGrbl.cps post-processor in fusion 360 and have the latest firmware in my interface...
Hi All, I have just hit a new out-out-of-bounds issue. I am trying to face my spoilboard. I am using the OpenBuilds post processor as suggested...
There is the problem. That post is written by people who have never actually run a GRBL based machine, so is theoretically correct but in...
Hello everyone, i have some issue while machining a workpiece from two sides (top/back). I use Fusion 360 for CAM and in the simulation,...
lets read the gcode, it is just text after all (Operation 1 of 4 : Adaptive1) G54 (This relies on homing, see...
Is the fix to add the stock height to the setup? That's what I'm having a hard time understanding, how to fix it. Great explanation, I've tried...
if you read the Gcode (it is just text) you will see that the start and end Z moves are at Z max less a little bit, the default is 10mm. G53 G0...
Bedtime here, which probably explains why I didn't fully understand what you were saying ;) Where have you located your switches/sensors on each...
Hello everyone, i´m doing my first steps in cnc and and i´m a little lost with the software. I use a RatRig Stronghold one (750x750mm) with the...
Those options tell me you are not using the OpenBuilds postprocessor for Fusion360. Get it here docs:software:fusion360 [OpenBuilds Documentation]...
Having read through all of this and the associated links, none of them solved my issue. The issue was in the post-processor and can be found in...