Separate names with a comma.
Some features disabled for guests. Register Today.
How did you manage the joint between the screw and the middle block?
Hi everyone, I'm looking to build an enclosure for my 60W CO2 laser CNC and I would like to have viewing windows in it. I'm wondering what type of...
Here it is, mirror it for the other side
Here's the plate I made for the CNC xPro, the top of the enclosure just finished printing. The hole is for a 60mm fan (50mm spacing between the...
12 pounds, 8 oz
Here are some updates for my minimill:
Printed some feet on vibration dampener:
Printed some limit switch mounts (X-, X+...
Yesterday night spare time investment :)
Can a X-Large plate be used instead of a double one on the Z-axis? I understand that the handles would have to be removed. Would it make it less...
I guess it would be a mix of :
7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring...
Can you send me your gcode file? It looks like you have a 25.4 factor :P (sees metric measurement (say 100mm) and moves 100 inches instead)
Micro Fly Cutter
You'll have to sharpen the cutting bit though, no idea how...
This is the base frame for the CNC assembly. The power supplies, pumps, electronics will be on the back, with the laser tube over it (on it's...
I just received the controller :)
It might be the flex of your CNC, try to do a finish pass after your cut (or cut the pocket a second time) to verify if it is better.
dddman published a new build:
Laser CNC, 60W, didn't have one yet... have to :) This build is a retrofit of a surgical laser into a CNC.
I knew it! Laser stuff!
Try to replace your pointy setscrew with a normal (flat bottomed) screw and see if the results are better
It would be used to upgrade my TB6560 dummy brain on my OX!
BTW, Bondhus are the best!