Separate names with a comma.
Some features disabled for guests. Register Today.
Finaly got it sorted. Thanks to Joe and a few other tweaks.
Just need to work out how to stop the burr on the edge of the cuts. Im using a 3mm...
Having played about with the micro stepping its running better but still no difference to circles.
Is it possible the hytech control board is...
Everything is tight. and no play.
Work is screwed down to eliminate this.
Every circle cut is identical to another (Not round)
It almost looks...
Its a Hytechworks usb board
I suspect this may be part of my problem with pibot driver boards.
They are all tight. I can't find any play in the machine.
Hoping someone could help point me in some direction. Ive attached a video below of the machine cutting a circle.
Its almost as if its skipping...
That's what I thought but I have ground a flat spot on the shaft and thread locked the screws etc to make sure it isn't slipping.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Just finished building my 4x2. Took me a while to figure out wit=ring etc but have got there.
I'm running Mach3.
I can get it to cut...