Separate names with a comma.
Some features disabled for guests. Register Today.
Refer to docs:blackbox:connect-vfd [OpenBuilds Documentation] and refer to the VFD manual. Names may differ, but functions are the same.
Hi were you able to get the BlackBox to turn on spindle on through the VFD ? If so would you mind sharing info on this? I have a Huanyeng VFD...
Negative, you are the 2nd person on here with that VFD. Regardless, the generic info suffices, for the details, the VFD has its own manual. Once...
Is the black box able to be connected to a VFD, and if so, where could I go to read about hooking it up to control the speed of the spindle...
do you mind sharing how you connected it i have the same vfd but have no clue what pins it uses
Love this BlackBox. I have been following @Sean Griffiths VFD wiring diagram and although I have a 110V VFD. Just curious if the external relay...
Never mind... Fixed it... Had to move the jumper on the VFD to external voltage control.
See BlackBox
...doc on it: OpenBuilds BlackBox 4X Documentation Its also been discussed a lot in this thread: =13735"]Search Results for Query: vfd | OpenBuilds
...to turn my spindle off and on through the software. I have a Huanyang vfd and from what i read all i need on the vfd side is to connect FOR and...
Make sure your jumpers are set correctly: OpenBuilds BlackBox 4X Documentation You also need to send an S command with M3. ie. M3 S1000
...completing my Lead 1010 build and have questions about the BlackBox, VFD, and the IOT Relay. I’m using a HY 110V/1.5k VFD and following the...
Thanks, yes that was it. Got spindle running and speed control running through the Huangyeng VFD...very cool
oops, sorry, I see now (: Well, then VFD settings more likely: PD002=1 and PD070=0?
...up... Coolant plug is going to my IOT switch, that works fine. The VFD wiring is according to this document OpenBuilds BlackBox to HuanYang...
...working? I am trying to use it as the spindle on/off trigger for my VFD. It just needs to close two wires which I have tested manually on the...
...it if you share some pics/writeup so I can draw up nice pics of the VFD wiring for https://docs.openbuilds.com for the next guys! I don't have...
Try $31=0 Although the minimum rpm is 8000rpm, the vfd may want 24000/8000*10v to do 8000 rpm. So setting $31=8000 shifts the scale
...to supply the PWM pin (Laser) and also to generate the 0-10v signal (VFD) - so both will be signal-active, thus you control which is working...
...it has GND, PWM, DIR and 0-10V. So I can wire my laser (PWM), and the VFD to 0-10V, and the GND connected together. Also, I am installing a...
