Separate names with a comma.
Some features disabled for guests. Register Today.
Sounds good. Ill correct the wring and order those drivers right now.
Probably will not get to work on any of it until after the holidays.
That's what I'm thinking as well. Might as well get it ready for the next step up.
Not overly tight of a budget. I would rather spend a little more and buy a good quality.
Seems like there's only one in the parts store
Had a free minute and I looked over the wall outlet. Seems like the slots are reversed?[ATTACH]
Sorry for the delayed response. I was out of town and away from a computer for the weekend.
Thanks for the replies so far. Lots to go thru to...
The spindle and psu is just a cheap ebay one i believe.
This is the PSU for the motors...
Having some major issues that I can not seem to straight out.
Picked up a used C-beam XL. Worked fine when I picked it up. Brought it...
<blockquote class="imgur-embed-pub" lang="en" data-id="a/LBsU2Rx"><a href="//imgur.com/LBsU2Rx">Spindle power</a></blockquote><script async...
Having an issue. Bought a used C-BeanXL. Everything tested out fine when i picked it up. Brought it home. Re wiring it and got to the point of...
If you use split molds then you only need to cut half mold at a time.
Thank you for the reply.
I have been reading thru that first link and I believe its getting clear for me.
I matched up the settings in the mach3...
Hi all, First thread start here for me. Been wanting a machine for a while and a project came up where it is now a necessity. So this all is new...
Keep us updated. Im curious what a good psi and cfm requirement is for this.