Separate names with a comma.
Some features disabled for guests. Register Today.
can you tell me, in this video you using what brand straight bit ?
why, when pocket right side like this ?
calibrate machine no problem
profile toolpath no problem
just pocket toolpath can't accurate
i can cut 40mm x 40mm
but, when i pocket 40mm x 40mm, result 39mm x 39mm
i use vectric aspire and mach3
only the right and left flat
[ATTACH] [ATTACH] [ATTACH]
why spoilboard surfacing like this
this spindle makita?
I have question
I draw a circle like this result.
where my mistake ???
I use a gecko G540
mach3 setting step per 33.37, vel 15000, acc...
i use RnP,
pinion pitch diameter 21 mm, 14 teeth
motor 200 step/rev, 10 microstep
mach3 setup motor tuning 30.33 step per mm, acc 4000, velo 500
hello, i have a question
why cut results not accurate (less than 1mm)
ex: cut 50mm x 30mm, result 49mm x 29mm
but from mach3 (setting alt6) really...
my bed test use dial indicator
flatness of about 0.2mm, whether it is flat enough?
for the X axis is wide, whether 1 c-beam better than 2 x 2060 ?
should be how not to flex ?
or use triple v slot ?
I am new member
I want to build CNC 1500 x 1500 using the V slot 2060,
for the X axis using double V slot 2060 rigid enough ?