Separate names with a comma.
Some features disabled for guests. Register Today.
Estlcam decides about the Z moves in a "better safe than sorry" style and prefers to do additional moves instead of more complex checks or...
are you using GRBL1.1 or Estlcam itself to control the machine?
Relays with low = on input logic are not suitable for this application -...
And the dxf files as promised:
got a lot of work to do the last few days but finally finished it:
[ATTACH] [ATTACH] [ATTACH]
To be honest I'd change a few things:...
today I found some time to continue the build:
The tablet is a Chuwi Hi10 pro with 4GB Ram / Windows 10 for...
a few weeks ago I learned the hard way that aluminum chips inside a notebook can be a really bad and expensive combination.
So my plan at...
you can even control the xPRO controller directly from Estlcam without external g-code sender software.
Just select the "Spark-Concepts xPRO...
yes - there are several options to do this (mouse, keyboard and xbox360 gamepad)
have you tried changing the "Invert stepper enable signal" checkbox?
Estlcam will ask you which language to use after the first program start with English as default.
If your windows installation however has a...
yes - Windows 10 tablets should work fine.
(As long as it is "real" Windows 10 - not one of those crippled mobile Windows 10 "RT"...
Raspberry or native Linux support is unfortunately not possible.
Program development would come to a complete standstill for a year or two...
I hope it is OK to post this here:
Estlcam is now also able to control machines with the xPro V3 board.
Just select the "Spark-concepts xPRO...
I just added a new video showing a fast and precise way to zero workpieces without expensive touch probes or edge finders:
stainless steel works quite well with trochoidal milling - even rather soft machines can do it:
Obviously the more rigid the machine...
Estlcam expects the switches at the left / front / top positions.
Maybe I'll make this customizable in future - but at the moment this is the...
Estlcam offers PWM in the "GRBL PWM" and "Estlcam" pinout setting.
You just need a PWM to analog converter to connect it to a VFD (can be as...
Estlcam uses its own firmware and can run on Arduino UNO, Nano and Mega2560.
It cannot control GRBL itself but offers GRBL 0.8 / 0.9 and...
I'm the programmer of Estlcam - if you have any questions I'd happy to answer them here.
Or just give it a try - the free version offers full...
Nano and UNO are interchangeable - if something works with an Uno it almost always works with a Nano, too.
GRBL and also the Estlcam machine...