Separate names with a comma.
Some features disabled for guests. Register Today.
Ok, I am going to list all the problems I had;
1. Z axis lead screws were packed together and the teeth rubbed each other the nut was not going...
This is a very bad engineered printer. Wasted money on this printer. I tried almost a month to make it work but useless. I have other printers as...
Have you ever measured your backlash?
Thank you very much. I will be looking forward to hear from you.
Yes I actually use 1/8 tools but I want to use some face mills with 1/4 shank. And with 1/4 shank there are more variety tools. Hard to find...
Is routy strong enough to carry dewalt dw611? I have been suffering with Dremel. Can't use tool bigger than 1/8. Did you mean dwp611?
4 from ebay.
I m usıng this on my Routy but it has a4988 drivers.
Arduino CNC kit /CNC Shield V3.0 +uno R3+4pcs a4988 driver /GRBL compatible TMPG
I would also recommend you buy really good quality end mills. Other wise dremel will suffer, mine already burnt because of 90 mins of non stop...
Great design:) I wish I have waited for this one:) Already started to Routy 290 :)
Here is Homing Cycle for Routy. Used 6 limit switches. Works really good. Wiring took me 2 days :)
Yes I didn't think about stability but wanted longer cutting area. I will use that for light cuts until I build a stronger one:)
Why putting the...
Very soon :)
First cut. Spindle and table perpendicular:)
Thank You for all your help Ronald.
I finally finished. Now I will start developing that. I have almost 390mm(14.8"), Y travel and 350mm(13") X...
Arduino Uno, even a clone can be used, needs to be flashed with GRBL
Set for X and y axis speed to 5000mm/min and 50 on aceleration, steps...
Your z axis looks very long. I think you may have rigidity problems. but its easy to fix, if you dont like it :)
You have a nice miter saw with adjustable speed. Mine is single speed and 3500rpm. I think it's too much for aluminum. I will buy one like yours....
I have a miter saw but for wood? Would it cut? Or yours for metal?
Z axis travel is easily adjustable. Right now I have 4-5 inches. I don't know about the rigidity for now. Still building. I work for a CNC...