Separate names with a comma.
Some features disabled for guests. Register Today.
...but in reality there is a much more workable solution. With "tiling" (i.e. pin registration) all that is really important is the width of the...
...be a dead-end with the Shapeoko 3...unless I wanted to work by tiling and indexing 4' by 16" sections. The fact that the Shapeoko 3 is still in...
...the two reasons listed above but also for instance I'm using Y-Axis tiling to CNC longer material than the bed of the CNC router can cut. (also...
...is not overly huge then this I can look past (and there is always tiling for everything else). The price difference is around £300+ GBP. The...
...only 33.85" which results in a lot of wasted material or required tiling approach which slows down the process significantly. The best thing...
...over 26" (X). However, another consideration is that with toolpath tiling, your open ended machine could theoretically cut an endless sheet of...
...money to build a bigger system and that's using pin registration / tiling. Do a search on youtube. You'll find it's fairly easy to cut 4'x8'...
...can easily carve a 6' board on a 500mm bed using a system called tiling (or pin registration). Handy if you find the 13" usable Y-axis length...
Thanks for your answer. I intend to cut aluminium (max 12mm I think) and wood on it, maybe try some pcbs too. I intend to mill a big alu bracket...
...to expand into something a bit bigger as I’m getting tired of tiling. I’m looking to make an extra long machine for cutting OSB, MDF and...
...are typically used to lay out tile in a room. I used this one Tiling/Flooring Laser | 40-6616 | Johnson Level & Tool Mfg Company and it worked...
"Cause serious issues" might be overstating it, but you're right - the stock leadscrew with a standard (non-high-torque) stepper on the Z might...
...The Makita works great. It is what I use. Research "tool path tiling" for more information. Each time you move the stock, you would start a...
Busy night :) So let me group the replies: @Michael Laley: You should be fine with 1.0.162 but I think your PC hasnt done the update right......
