Separate names with a comma.
Some features disabled for guests. Register Today.
...How did this pan out for your setup? Any update? This seems like the least invasive solution I've seen that still allows tiling a longer workpiece.
I was opening one of four tiling files in the contain software and had no problem. When I went to open the second one it opened really small and...
...depending on where you mounted the limits etc For longer cuts, use Tiling: and a feed through table to hold the stock as you move it [MEDIA]
...leaves the X-axis full width and allows for wider stock to be cut. Using tiling (pin registration) you'll never miss the 10" you cut off the...
...yall from the rest of the "browser based" crowd: Toolpath tiling, arrays and transforms - These functions are stupendously valuable features...
...to cut anything larger than 24X24". If I do, I can use tool path tiling. VCarve Desktop v11 and...
...have to have a machine big enough to cut the whole sheet at once. Through pin registration and tiling, large sheets are easily cut in sections.
Once you work out pin registration and tool path tiling you'll find you don't need one that will cut full sheets. As the flat bed of the OX...
...1515 FULLY LOADED! [ATTACH] Yes it does. You can slide through a full sheet working on half at a time using the Tiling feature in Vectric's CAM
...what @JustinTime commented on the signs really love them and the tiling technique you use to make this large of a sign by moving the board...
...it leave high edges all around the workable area? I plan to do some tiling work where I would feed a long piece of wood through the machine in...
...a crude sketch of the idea Basically just two Linear actuators, a tiling camera head and a rotating table. im confident about the mechanical...
When I do a tiling job I use the front, left corner. After doing the first tile I jog the machine the distance of the tile and use it to mark the...
Thanks for the Feedback - checkout the existing plans OpenBuilds/cam too, some (not all your requests, but some like transforms: Boolean...
...requirements were similar. I can get a 1/4 sheet on it, or with tiling, I have run an 8 foot narrower piece through. I personally do not have...
...and it still cut bad. Using carbide create 6 to create the file and tiling the cut with gcode tiler by fjield. I've attached both gcode files....
...before I am ready to assemble the CNC (I have a bathroom to finish tiling this weekend too... the to do list is ridiculously long, and this is...
...longer than the machine bed on it which allows for tool path tiling (cutting things longer than the machine). Honestly, it is hard to tell...
Thank you so much. This picture that I sent before is from another machine from YouTube. I’ll be in my workshop on Monday, and then I can take...
...do you really need that 2,000 mm? - there is a technique called "tiling" which lets you split longer jobs into sections which may be a better...