Separate names with a comma.
Some features disabled for guests. Register Today.
...through the material but not touch the spoil board so I do not have to resurface as often. :thumbsup: For larger stock I still use hold down...
Did you design the limit switch mounts, or did you find them posted somewhere? I like the design of the them, would you consider posting a link...
...they? GT2 or GT3? On the workbee the belts run inside the cbeam hold down by the mini Wheels, anny idea if it is room to run the dubble/stacked...
I have been forced to down grade from my larger CNC 4 axis mill and plan to build my own smaller one based on the great projects I find here...
...stick well enough to aluminum. I am getting ready to expand my C-Beam machine and am starting to look at how do I hold down large piece of...
One thing to be aware of with heated beds... Neodymium magnets loose their hold at elevated temperatures. I'm talking in the 80*C range, they are...
Test fit @Metalguru, more like press fit on a 500mm actuator but I think it might work, just needs the other nut block filed to fit and filed down...
here is the files we used to create the hold down and the waste board. I tried the cheap board but after a little cutting oil they swell up. I...
Haven't talked about the main hold down board, here is a picture of it. we had the machine drill all the holes. there are 5/16" holes tor dowel...
While they are not cheap, these, are super sweet. The 5 mm turned down ends are pro. Makes installation super easy and they work with most gt2...
Ah see, I don't use hold downs, I find they get in the way alot of times for me.... The way I figure it if I go through 1 $30 bit every 6-12...
...options. We sell T Tracks T-Rail T-Track 500mm and clamps Hold Down Clamp Set in the store too. Also T-Rail Threaded Knob and Bolt Set for...
Setting up a pen mount and solenoid to “engage” the drawing mechanism. On the OpenBuilds Blackbox I intend to use the external plug for the 24v...
Thanks - I had already seen the thread on dampening, it seemed like overkill for my needs. I wasn't hitting anywhere near 2500/1oo yesterday so I...
Thanks for the reminder. I was going to see if it generates enough pressure, without damaging the work surface, to just give that extra little...
...I've got 2 aluminum bars and a couple of plastic cam clamps to hold down 1 1/4" x 1 1/4" balusters for milling slots and pockets. None of the...
Hi Jack :) Do you mean the black rectangular hold down plates? If so, I do apologize as we made a few sets of them but did not pursue continuing...
I RECENTLY UPDATED MY OX-CNC ROUTER TO HOLD A BOSCH ROUTER. EVERYTHING WORKS AS INTENDED, HOWEVER RIGHT BEFORE I HIT PLAY ON MY GCODE, THE Z-AXIS...
Marcus, yes you just interlock and hold down the ends so they can't move around. The reason why i say it took 3 tries.. 1st) i used too much...
You are welcome yes. Vibration prone environment :) It still looks more like backlash than calibration. Leadnuts tight against the plates? No...