Separate names with a comma.
Some features disabled for guests. Register Today.
As far as I know, I'm correct in that whatever pendant you are using needs to handle figuring out that you want continuous movement. Like if you...
Just a thought - if you have strategically placed holes in your spoiler board you could (using a magnetised screwdriver to hold the screw) fasten...
Also always available on git: History for grblhal-grbl3axis.bin - OpenBuilds/OpenBuilds-CONTROL If the Run/Flash jumper is in the Flash position...
...on an Ox) with flood cooling. Therefore, I use an acrylic spoiler board. Someone who will be cutting thin sheets may prefer a vacuum hold down.
...for ply will eliminate fraying. Balsa is more of a struggle to hold down, but you don't have to worry about laminating. You should be able to...
How are you ensuring that your pcb is perfectly flat to the spoilboard? Personally I wouldn't use screws to hold the pcb down, I'd use masking...
A vacuum hold down is easy and cheap to achieve with MDF, some PVC pipes and valves and a shop vac. I divided the bed into 4 zones which can be...
I was also wondering if 1.5 meters of G3 belt can hold 5kgs of weight? Anyone had some experience with this? You bolt down the belt one end at the...
...directions to update from Control Specifically, make sure you hold down that "mode" button when you hit the reset button on the Interface....
No it wasn't fine, you had to download the Bin, instead of having the nice built in "Use latest" option available where it downloads it...
...an issue I have ran into with sketchucam, I am laying out a new hold down board and a spoil board, the spoil board is just through holes lined...
Yes, a shop vac will appear to hold down a sheet of material but lateral forces from the cutting bit will compromise it. A proper vacuum pump is...
You could always use the router to surface one side at a time if you can hold it down so it doesn't move (would be a lot slower than a...
I like this with the threaded inserts. I am thinking of doing something similar. Nice work.
Does that really provide enough hold for aluminum?
Sorry, just saw this notification - The feed hold and abort options will trigger and hold until the offending event is completed/cleared. In this...
I hold it down with one finger!
I would suggest modifying the original drawing to include the chamfer and deleting all but 3 of the 5mm holes, keeping ones as widely spaced as...
Essentially it's the atmosphere pressing down on your work, so with a perfect vacuum on the back side it would have a force of 14.7 lb/sq in. If...
Watch out for the nema 17 Z axis motor. It seems that my motor wasn't powerful enough to hold the weight of the router when there's no power to...