Separate names with a comma.
Some features disabled for guests. Register Today.
The straight line runaways do look like EMI: see docs:blackbox:faq-emi [OpenBuilds Documentation] But do rule out as well: - acceleration and max...
...exactly, I would say you have a Spindle that spits out a tonne of EMI that false triggers the limits (: See docs:blackbox:faq-emi [OpenBuilds...
...gcode (post file for review) Or it could be corruption caused by EMI: docs:blackbox-x32:faq-emi [OpenBuilds Documentation] Also make sure...
...to GND for example, voltage rail drops too low, microcontroller reboots) but could also be EMI: docs:blackbox-x32:faq-emi [OpenBuilds...
But all my old g-codes are working properly which I have made using the openbuilds PP
With EMI it's always more important to address the source. The X32 is FCC certified, so more likely a problem coming off the VFD. Proper earthing,...
...has it's own earth low voltage (24v stuff) has its own earth do not connect the two. =emi"]docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
...on the commutator. more sparks means more electrical interference (EMI) is transmitted. and that is what caused your error 9, the EMI caused an...
EMI?
See docs:blackbox:faq-emi [OpenBuilds Documentation]
Refer to docs:blackbox:faq-emi [OpenBuilds Documentation] Onset of colder weather increases static charges in the air
Forgot to mention earlier but also just check docs:blackbox:faq-emi [OpenBuilds Documentation] (could be corrupting serial data)
EMI most likely. Search is broken at the moment, but we get several of these posts a week around here. I believe all of them have been tracked...
I "started here" and was unable to find anything
...your BlackBox Warranty The unfiltered Endstops can cause a lot of EMI issues, we recommend the filtered Xtension limits...
...[OpenBuilds Documentation] 2) Could also be EMI: docs:blackbox-4x:faq-emi [OpenBuilds Documentation] 3) Make sure your version of CONTROL is...
Thanks for the quick response, Peter Come to think of it, I turned off the lights around about then, bright neons so maybe that was it.
I’ve worked really hard to eliminate the EMI, ferrite rings, cable shrouds, isolating the VFD as much as possible. It was working fine but yeh if...
...I would take the earth from the VFD directly back to the tag on the EMI filter, where the earth from the supply is also connected. If you are...
