Separate names with a comma.
Some features disabled for guests. Register Today.
...using, which limit switches, which machine? False triggers could be EMI or incorrectly wired limits, or upgrade to Xtension Limit Switch Kit...
...[OpenBuilds Documentation] or more likely 2) EMI: docs:blackbox-x32:faq-emi [OpenBuilds Documentation] and Points more at an EMI issue - VFD...
have you calibrated the Interfaces buttons? do all the anti EMI stuff in the documentation? EMI can afffect the touch sensitive buttons on the...
VFDs create a tonne of interference yes - checkout our FAQ page: docs:blackbox:faq-emi [OpenBuilds Documentation] for more info
Check out docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Sounds more like EMI docs:blackbox-x32:faq-emi [OpenBuilds Documentation] that is, unless the machine actually does run into the limit switch?
Log outputs would be helpful. But probably EMI or a wiring issue (the resetting sounds almost more like a short somewhere between V+ and GND...
...the 3d View, does it show these odd moves too? If not it could be 2): EMI: docs:blackbox-x32:faq-emi [OpenBuilds Documentation] or 3)...
...it might be that some sort of serial corruption happened due to EMI. Hard to know without more info. docs:blackbox-4x:faq-emi [OpenBuilds...
See our comprehensive guide here: docs:blackbox:faq-emi [OpenBuilds Documentation] Also personal opinion is the low quality amazon switches....
...all electronics are grounded. I have also grounded the frame. I’ve never had a problem with EMI before so I hope the interface will work properly.
Emi can get into your pc many ways. As an example : Thin mouse cable, and a shielded usb to BlackBox both plugged into same PC. Guess which one...
...That would be overkill. Spindle and Dust hose are the big sources of EMI. Earth those two and you are very unlikely to have any issues. See...
Sounds like EMI related serial corruption: See docs:blackbox:faq-emi [OpenBuilds Documentation] Put it inside a metal enclosure, or get an...
...2) Check wiring - short could make Grbl think switch is hit 3) Check for EMI related false triggers docs:blackbox:faq-emi [OpenBuilds...
EMI causing serial corruption (corrupted response from controller appears to have an A axis, GUI adds it as it should) docs:blackbox-x32:faq-emi...
Could be EMI (see the FAQ in the Blackbox docs docs:blackbox-x32:faq-emi [OpenBuilds Documentation]) or outdated firmware (Make sure you are on...
Checkout docs:blackbox:faq-emi [OpenBuilds Documentation] for our comprehensive FAQ on EMI, also make sure you didn't forget step 4.2 of the...
Sounds like EMI. See docs:blackbox:faq-emi [OpenBuilds Documentation] Its something (spindle, dust extraction, etc - tell us what you are...
