Separate names with a comma.
Some features disabled for guests. Register Today.
That would be a function of Grbl itself, not the sw... See gnea/grbl for details
...origine on my part (-80ish) probe new tool (ok) probe new tool (error 9 on G38.3) probe new tool (same error) So error now doesn't seem...
...on it and feel a little more positive, include the FULL error, Error 9 is usually a symptom of an earlier alarm, so without the full error...
Did the error pop up right after starting the spindle? If so: spindle creates EMI. EMi created a false limit switch trigger. Limits wiring too...
I'll start off by saying I am extremely new to all things CNC. I have some knowledge in 3D printing having built a core-xy 3D printer but have...
Hello friends I have again problems with Openbuilds Control on my RPi4. Without warning it does not start anymore. I have changed absolutely...
Hey Misterg, I was testing this again after setting the macro to run on startup which it did fine. homed the machine, ran the macro from the...
Error 9 is a lockout from a prior alarm. Its merely the symptom of something that happened earlier. Pay note next time it happens to look for the...
Just a bit more on this; I set the VFD to use the operator and the pot on the front and when the machine is moving, and I turn the spindle on...
Thank you for this software. It is amazing! One issue: I encounter an error when attempting to open a Gerber file. An unknown error...
Hello. I have a Workbee 1515 with a black box controller and running the openbuilds controller. I have been running this since January without an...
Node is 19: pi@raspberrypi:~/OpenBuilds-CONTROL $ node --version v19.8.1 electron makes trouble: > [email protected] postinstall >...
Thanks for the response, but I'm still having trouble. I swapped to the macbook, got a new cable, and I'm attempting to reflash. I think I've got...
This a new install. I'm using grbl Ver 1.1 and UGS 2.0. Just trying to cut a simple circle. G Code from CamBam. ( Made using CamBam - CamBam...
Hi, I'm having a heck of a time. I've been mostly successful building a laser engraver (A simple XY laser engraver/cutter). I've set up GRBL...
I agree with what you said. some critical detail about sequence of operation is missing. Also details like MKS driver setup is not explained.
Hi, I am having a similar issue with Error 9 triggered by "Alarm 1 hard limit triggered". I disabled hard limits in my GRBL settings and rebooted...
How many of you have experienced a chip out of a project you were machining after many many hours into the process. a great lump frustratingly...
...test ESP32). I have tried the following without success (still error 9): i) The current version of GRBL_HAL; ii) The current version of...
yes, I have shielded all cables but still have problems with error 9. Plasma cutting with runed off limit switches is possible. As soon as I...