Separate names with a comma.
Some features disabled for guests. Register Today.
That is a Fusion360 default GRBL post output (confused about where easel comes into play?), please use the Openbuilds post instead (it also puts...
Demon post is for old Grbl (3 Axes, wraps rotary around X or Y) There is no "4th axes" axes post for Vectric that I know off, you certainly can...
I don't a see a mention of how you are generating your Gcode, nor an attached Gcode file for us to check so I am guessing. if you are using...
Those options tell me you are not using the OpenBuilds postprocessor for Fusion360. Get it here docs:software:fusion360 [OpenBuilds Documentation]...
Yes, you still stream gcode using CONTROL: See docs:software:overview [OpenBuilds Documentation] CAM side you can use OpenBuildsCAM or Fusion360...
If I may ask ? What machine have you post processed HSMWorks to ? There is a HUGE selection, including generic grbl and generic grblplus - - but...
Thanks so much for the answer, so could I customize some macros to do the home loop? If I used a different card with more pins, would the problem...
If we dissect that line of Gcode we can get an idea of what is going on. G3 X24.0944 Y9.8490 I-0.005 J-0.0497 G3 indicates a CCW arc. X and Y are...
Like the others have said, I usually design what I want in CAD first, and it's then a logical step to use CAM to generate the gcode (it means I...
(; they would read the Grbl wiki, honestly, that's all I know more than a novice (: No idea! But a) a 1510 is not an aluminum cutting machine...
come to think of it, that is a very long staydown setting and that might be causing the lack of retracts between probes/cut starts. since it is...
comments cannot contain anything but plain text (as stated in the Wiki) , and no embedded comments so (this is a comment (with a sub comment))...
thanks <-: I would use 'the paper method' to find the surface of the waste board with the tool before mounting the stock. Note that you need...
You don't say what controller you are using but lets assume a Blackbox type runnig GRBL. GRBL understands G28 as a 'go to stored position'....
thank you super usefull. I manly work on opb cam but will have to try fusion. fusion is a steep learning curve
Thanks Joe, this sort of helps a little. I think if I do go for a CNC I will start with the DQ542MA drivers for sure. Not sure why to go for a 48V...
So I’m working on building a cnc plasma table, will have thc, and floating head. I’ve been tinkering with marlin and 3d printers for about 8...
yes in Fusion360, , in the options for each cut there is a section for 'compensation' with options for in computer in controller in computer...
I think a better way is probing so you can set the WCS correctly from what you have and then run the Gcode relative to that WCS (or even more than...
Hi I am going to add comments to the gcode below to explain what it is doing (Made in : Autodesk CAM Post Processor) (G-Code optimized for Grbl...