Separate names with a comma.
Some features disabled for guests. Register Today.
Hi GRBL regards a hit on any limit switch as a hard limit and will then stop with an ALARM. This is mainly because the Arduino Uno does not have...
Thank you!!!
Thanks for reply, so when my machine homes to the offset positions I have it set to resset machine coordinates to zero. The screenshot of the...
Hello I did the update of the GRBL post-prossesor to V1.0.37 and a redid the job. But got the same error and this time de plasma cutter was off....
I'm reasonably familiar with Inkscape, however I've never used it to generate GCode (I presume you're using the 'gcodetools' extension?) From...
This is awesome! Before I made this post, I googled all these commands to "see" what was going on and I'm happy to see that my notes match...
Depends on what exactly your widget is: option A something with complex 3D shape and curves on the top option B an essentially flat thing with...
There is the problem. That post is written by people who have never actually run a GRBL based machine, so is theoretically correct but in...
in your image the arc has a radius of 0.64mm. As the radius decreases, the limits of accuracy of the endpoints approach rapidly. The best fix...
I think this is the solution. I put in 1 in the WCS Offset and it doesn't give that error. Defining Work Coordinate Systems in the Fusion 360 CAM...
Hello all and thanks for all your replays. I have now used some hours to get a better circle by adjusting the screws. - It is not 100% perfect...
This can be caused by 2 things: 1 - You need to set the end of job Z position option for the post-processor correctly: [IMG] you need to set the...
calibrate machine no problem profile toolpath no problem just pocket toolpath can't accurate
Indeed that does work but it does not address the fundamental elephant, the machine does not have a safe home position that is the basis for...
Welcome! Can you clarify this? You say that you got everything except software. Does this mean that you bought a controller with it as well?...
nothing wrong with that gcode, it expects the top of the material to be Z0, and it expects Z home to be the top of Z travel as is standard on all...
I've read your posts Jeremiah. Your going to spend a lot of time messing with grbl for the work you want to do. Sure, one could say run any flavor...
That's incorrect: The BlackBox X32 was launched a couple months ago... Its predecessor, the BlackBox 4X was only a 3-Axes controller running grbl...
so that is what REALLY changed, the size of the bit. A lot of automation goes on in generating Gcode, I don't know VCarve but Fusion360 has...
That would be because you set the Z offset to +15 in the Fusion360 post options. The default is -10, which prevents it hitting the limit switch....