Separate names with a comma.
Some features disabled for guests. Register Today.
I am using fusion360 cad/cam for the moment,
Hi Joe! Thanks for the detailed reply. I'm in no rush with this project. It's to house my electronics to protect them against the elements. I...
Hmmm, found some interesting things in the plasma processing.... go here GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor...
Hi, I use solidworks for my CAD and CAM program, but the workbee has all axis homed when I start the carving.
I will check it out and compare with my edit..... I changed the reference in the post processor. I believe it use peirce offset and I changed it...
fixed in V1.0.41 GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running...
i doubt the movement caused the board to fry.. the current is limited and the board is protected. Post your grbl settings for your xpro here....
@pjunger You need to select a post processor which doesn't use arcs as this isn't supported in GRBL. I am not sure why the best one is in...
In Case someone else had the same question as me, I figured it out. When I am creating my tool path in RhinoCAM, I left the machine as undefined....
sadly, the grbl post supplied with Fusion360 is not very good at all. Here is a better one GitHub - Strooom/GRBL-Post-Processor: Start and yes,...
Also note that in GRBL moving to X0 (or Y or Z) WILL hit the switch and cause an alarm. This is why the OpenBuilds Fusion360 post will output...
Peter that doc needs to be updated to the latest release link...
Fusion360 CAM can generate gcode files that can be loaded straight into Control. It's a three stage process: 1) Make a 3D model in the Design...
I’m going to read the link you sent but one thing to add is that I haven’t edited this code at all this was a direct fresh dump from fusion.
Are you using the same post processor for the machine setup as you are when generating the gcode? If not, you could get different behaviour. The...
You are taking about the Fusion built in Grbl post? which does a lot of things weirdly (that included) Most of our customers do (and more should)...
The Openbuilds Fusion360 post creates an .nc file per tool. so 2 files means you have 2 tools selected. This is commented inside the .nc files,...
Those instructions seem to match those from Autodesk, as an alternative you can install the post processor locally - instructions here -...
I take it you mean in Fusion360? The OB post already inserts a bunch of info about the job, but not as 'variables' because GRBL does not...
on the other hand I am absolutely sure which postprocessor is better for plasma, our Openbuilds post is the one (-: The stock one is not good at...