Separate names with a comma.
Some features disabled for guests. Register Today.
I am pretty sure I did when I chose the acro setup. When I first tested, I was using 3 axis an three switches and I depressed the z first. I...
CONTROL is just a gcode sender. But OpenBuilds CAM at OpenBuilds CAM Gcode Creator - Public Beta does have multiple passes, but as the default...
I just mirrored how the motors on the acro were connected. I’ll have to research The wires on this z-axis stepper motor. Is there any literature...
While I like the idea of having an adjustable Z-axis I am not sure that the 2040 beam can take the torque, and I am sure I would not put a router...
Did you even flash the Acro / 2 axes version at some point. Why? The flashing tool should work, so not sure what's different about yours. I see...
This is awesome! I'm also building ACRO to cut model airplane parts as well! I'm planning to use mostly 1/8 and 3/32 balsa and 1/64 ply and 1/8...
I'd advise against it: People forget the weight of the Plasma cutter hose/cable coming off the torch. It weighs a lot and will crack the acrylic...
Don't - the Acro system is a lightweight design suitable for plotters, lasers. It cannot take the heavier Z axis (doesn't come with one - you...
The XYZ linear system is equipped with 4 stepper motors. With the robust v-Slot profiles from OpenBuilds, the machine is ideally equipped for...
Hi, I want to make machine with 1000x1000 mm vertical load with z-x axis. I initially tried with acro 1000x1000 with nema 17 but slippage was...
Thank you, I did that. The solutions are not something I want to have to work on, I would rather have a bolt on option. I saw cutting rails,...
Acro 1515 with additional Extrusion frame to allow overhead rigging support. Upgraded 2.2amp Nema 17 Motors for X & Y Nema 17 Linear Z-Axis with...
It's not an Acro, but I did use that as a starting place. Long story short - machine was originally an OxMetal (modified Ox with lead screws),...
On boot up early in the video you can see Grbl-Alarm top right. Your BlackBox is alarmed before we even connect to it It won't accept jogs while...
I am assembling an Acro 1510 unit to be used as a pen plotter. Everything has been going fairly smoothly but I have an issue with the stepper...
What I have are 2 small "L" brackets at each corner. Then I place a shim the same thickness as the material that I am etching to raise the entire...
Our "2 axes" build is for the Acro, as the default Grbl setup wants a Z axis homing switch if homing is enabled, and you try to home. It errors...
yeah balsa and some birch ply that i am sure with the right bit and speed i can cut through it like butter... and if anyone can point me in the...
Thank you. Understood. I need only about 10-20mm or so play with Z but it needs to be controlled. I do not know how heavy the "V-Slot® NEMA 17...
So I have a blackbox motion control to drive an ACRO1515 plugged to a raspi controller over wifi using the web interface. I can connect to the...