Separate names with a comma.
Some features disabled for guests. Register Today.
It’s only a 2-axis design. How are you going to raise your printhead? As to speeds and feeds, that depends on what you use to drive it - the...
Yes sir, those are indeed T slot wheels.. I decided after looking at how the acro is put together, I flipped the x axis upside down and it...
Howdy all, asking from work so I don't have the time to look through the thread for info, but I bought an eleksmaker/benbox laser frame clone, and...
That can be arranged :) - as we have Machine profiles on the Settings tab, I can add a "I have a Z axis" option to still keep it easy for Acro...
The ACRO is a laser cutter that is not meant for milling. Nor does it actually have a z axis. Understand the difference between adjustment and...
Thank you Peter for your input! I apologize for my delay. I have adjusted the acceleration and the feed rates (multiple times) to numbers closer...
Hi chuckd Can you elaborate on what you need exactly? Do you need to elevate the machine off the table? Or do you need a movable Z axis to mount...
Claudio Prezzi, the Comm's developer on team-LaserWeb, has a Grbl fork here cprezzi/grbl-servo that supports Servo's for a Z axis - he built a...
I recieved and installed my acro 1m x 1,5m. And did some succesful test runs with the grbl software. Thanks to @WildBill for the tip for the...
So my Z-axis was not homing and after searching I read to flash a different version .grbl then flash back to 1.1f regular version. It looks like I...
Hello, Just set up an Acro 1510 w/ BlackBox x32 to use as a pen plotter but seem to be stuck when loading firmware. There is no 2-axis firmware...
Keep in mind the Acro is a lightweight 2 axes machine. It has acrylic plates. Whatever you plan on attaching, keep those facts in mind and you'll...
An adjustable laser (powered z axis) would be beneficial because you could focus the beam on your "poil board" then move the laser up the height...
Like Giarc mentioned, I use my Diode laser to engrave items that are vary greatly in thickness, from a few mm to several cm. The laser has a...
Hi Steven- We now have a Z Axis Upgrade to the ACRO system. Perfect for cutting thick items with multiple passes....
In the stock Acro configuration, there is no motorised Z axis, We did however not yet need it - a couple extra passes on usually does the same....
I think that if you want to use the ox side plates, and you want something that can handle the torque of a router/spindle, you should have built...
I ordered the ACRO system with CNC xPro board. I am planning to build a two-in-one machine - a 3D printer and an engraver. I'll use the stepper...
I would do it that way (unless your build differs drastically) Yes, but make sure to flash the 2Axes version from the Flashing tool (or when you...
