Separate names with a comma.
Some features disabled for guests. Register Today.
Hi everyone, I'm having issues with the blackbox x32 plus OB Interface. I'm not able to run a simple job as surfacing the spoilboard because it...
This will probably seem like a dumb question to all you experts out there but I could really use some ideas. I have nearly completed my home build...
I have suddenly encountered what I believe to be a Static EMI issue. I have been running my 1010 with the same setup w/dust collection for over 2...
Not sure what happened but just setting my CNC up with a blackbox and Interface. I've played around with the Interface while building the machine...
So I’ve been running into an issue I think is caused by some type of EMI. At least that’s what I’ve been reading based on other posts. I’ve...
Has anyone thought about using ferrite to reduce / eliminate EMI for the limit/homing switches? EMI Ferrite CNC Active Filter USB Cable Size TDK...
...the machine is just very unpredictable. Is this yet another case of EMI? I haven’t changed anything, machine has been running essentially...
Hello, I have a problem with EMI interference Shielded wires, all grounded, a filter installed and as you can see, it does what it wants or goes...
From what i have read an emi filter can help with vfd interference issues. I just bought one of these:...
Machine pauses frequently when running code. I hit "restart grbl" starts up then will eventually pause again. Any help is appreciated thanks.
...Making it out of metal and grounding the case will protect it from EMI, but is that relevant in this case? Has anyone made a controller box...
...switches thinking this was a false trigger on the limit switches from EMI. After tramming, I re-ran the surfacing program once more and ran...
...it randomly jogs, sometimes the button are unresponsive, etc. If it is EMI, what else should I ground? Should I ground the blackbox itself? The...
Hi, I've built my LeadCNC 1515 and as I powered up the system I immediately noticed a lot of noise coming from the stepper motors. Now, at this...
Good afternoon. I want to avoid any potential EMI problems. Can I run the Light Ring power cable (24v) in the flex tubing and drag chain along...
...computer port down and mostly all because of electrical interference. (EMI) I have to admit my guilt that I had not studied the blackbox...
...to leave a note to an issue I had with a Huanyang Spindle and VFD EMI Problem on my modded Sphinx 1010. Backstory: I was running an Xpro V3...
Just a little bit into a very short and simple post the G-Code stops the table movement but the torch stays running. Once in a while the whole...
...symptoms in the past - so I have little doubt that there's an major EMI issue at play. It's the surrounding circumstances I'm a little puzzled...
I am working on bringing up a blackbox controller on a Cnc4Newbie machine. I am currently testing the integration of the VFD spindle/relay and...
