Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks David :)
Thanks a lot. Two half circles explain already a lot :) I will look for it in the Wiki
Anyone that could point me in a direction so I can read and understand the syntax of G02 full circle for GBRL 1.1
Thanks in advance
Thanks Peter. Well noted
Yes GBRL ignores this codes
In the wiki list for GBRL V 1.1 I can find the G40 for cancelation of compensation. How to compensate when not having G41 and G42
Okay thanks. I will check
When I start Openbuild Controle in Windows 11 it disable the 3D view, and say WebGl not installed.
I did test WebGl and it seams to be there.
Okay then was just a nerdy thing :)
Yes David, that is what I do in Carveco se example below
(G-CODE FOR Openbuild Black Box)
I know. That is why I want to use the M0 (Pause) then i can change the tool manually and probe manually. I have done that in my post process...
If a project include different tools like a 2 mm endmill and a 4mm endmill, I the Gcode do not stop or pause for a change off endmill. Would it...
This is looking amazing Great work!
No problem :)
I also have a A2 inverter so I made a schematic and configuration for that as well.
After you have connected and programmed the VFD...
And finally I got my H100 VFD 220V with 1.5Kw Spindel 2 poles air cooled connected to the BlackBox. Follow the instruction above. and...
Works like a dream now. Everything okay :)
Lately I started to get the message Please wait for the machine to be idle. See picture.
I scan the QR code screen load without any problem. But...
And man, I am happy with it. works like a dream. My G0 speed improved a lot, especially on the Y axis.
Thanks a lot.