Separate names with a comma.
Some features disabled for guests. Register Today.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Super sweet build! I’m very interested in doing this modification to my machine. Would it be possible to get the end plate’s dxf file...
My setup is 1/8usteps on my control board. Sorry for the late reply was at work. But I attatched some images of my settings in the...
Here’s a look at my current settings, I have the gt3 belt and 8mil lead screw also.
Any time! And thank you. If you have any questions I will try my best to answer them.
I’m fine with using any other controller, just a new learning curve, but my issue currently is not being able to update gbrl to the...
Update, I was able to get it to move via chilipepper... I would much rather use a controller that doesn’t have to be connected to the internet.
Have this board a few months, only been able to use my machine a few times since I’ve had it. (work travel)
Over the weekend I went to use my...
Thanks man! Let me know if you need assistance setting yours up.
I think I'm in it roughly around $1,300, That's included some extras I had to purchase to get my computer updated to work. Hope that...
Thanks for all the help, I managed to get up and running yesterday ended up changing the post processor and everything was good after...
Just got to fine tune it now. Thanks again for your help!
Hey Taz, changed the file to an mmg and I think i'm on to something got it to cut at .25 and a circle. I used the same pp as the axiom I have...
Yes will do
ah Okay! Well I'll definitely keep in touch and let you know what i figure out Thanks again for the help
What are you grbl settings? Maybe i could try them
Correct. I'm going to step away from the machine for a bit before i get anymore frustrated.