Separate names with a comma.
Some features disabled for guests. Register Today.
any progress on this idea, love to switch over to rack and pinion
well once you slow it back down to normal cutting speeds, its good for what i do on the machine
a vid of me pushing the jogging to the limits..
ive recently finished mine, upgraded my ox to my own spec..
I used c beams and used the double belt...
thought id show you mine, took apart my ox and built a bigger one, just finished today.
i did find the c beam flexed so i had to add the brackets...
hey man, great build.. any updates? im in the process of making a 10 x 5 too from c beam too, well bought and buying bits to do the build lol
i know mine did that when set to mm on ugs, changed it to inch(mine is set up in inch) and itll work correctly.. give that a try
yes thats all i cut tbf, think the one i have is a SIP01952
depends if you like you ears?? that one is quite loud from what ive read up on
i got a sip one and is quite, the spindle is louder when cutting!...
just a quick one.. anyone connected their xpro v2 to a vfd? as in control the speed of the spindle and turn/off too? i have a hy 2.2kw vfd but...
got some more bits done but can say its working!
Ah i was near you last march in Melbourne for a month
yes cold rainy morning here in Leicester in the UK, where are you from Moag?
ive got a 1.5kw air cooled spindle and a 2.2kw vfd
i have swapped...
Morning or evening for you @Moag
Yes I've read up that the first 2 are due to low voltage but i have read that it could be solved by swapping...
Just followed your guide and for the spindle spinning!
On you guide, it say s check PD 177 to 180 however i got these messages
great read so thanks for the guide..
just wondering if you have connected the vfd to your cnc controller board so you can activate it on the...
Yes same here, bought everything plus a full set of collets doh
I'm just going to keep it box incase i build another stronger machine
Just tested what sort of weight the motor could take..
SO it takes 3 bottles, a cut off of 3/4 mmf and the mount which cant been seen...
So finally got some specs for the spindles:
1.5kw water cooled spindles：
Spec: φ65x188 mm (Diameter:65mm x Length:188mm)
Power: 1.5 KW
yes all of the steppers are nema 23 (2303hs280aw-c)