Separate names with a comma.
Some features disabled for guests. Register Today.
Yes. The interface to the BB is a USB/serial connection, and you just send it Gcode commands. The Gcode commands tell it laser power and...
(This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z0 Z0 is always going to hit the limit switch, that is why...
The SketchUcam plugin for Sketchup adds a G4 P0.1 after every servo pen movement. This forces synchronization with the command queue, but may not...
you cannot probe during a pause so you must mean you are adding a probe macro after the pause. bit changing during a pause is very dangerous, an...
well, something changed while you changed the bit. depending on exactly how you do that you may be putting a lot of force on the Vwheels,...
Excessive Z axis retract which, oddly, describes the how and why of homing (-:
Do remember to HOME the machine.... and those max rapid rates? 16+meters a minute for real? Set these to the real travel lengths of your...
the generic answer is use the post that outputs the simplest possible , plain Gcode. No toolchanges No drill cycles or other cycles, just plain G1...
While it is possible to calibrate an entirely unknown system (1), the process is simplified by making a few assumptions to get a starting point....
You are using an older version of the postprocessor, please upgrade as soon as you can from Releases ·...
please read Home, Fusion360 and G53 Z moves
too hot I think, the foam will melt back far beyond what you want, hard to predict
a stepper motor can easily generate more volts than your power supply outputs when you turn it by hand. so disconnect the motor, or turn very very...
put a counterweight on the head to support the weight. just a pulley above the head and a rope from the head, up, over, down to a weight that just...
[MEDIA]
agree He died in 2012 and there is a new holder of the call, a lady in East London. Dad was a ham since his school days in the early 1930's....
could also be the X driver is overheating and cutting out.
Hiya Frik I'd be surprised if such a project does not exist, but I would be surprised if it really works well (-: Let me Google... some products...
remember to reset the BB after changing the settings before you do another move to check the distance
note that aluminum oxide is not conductive So, it is quite easy to fail to probe the surface of aluminum, and if it is anodized (which creates a...
