Separate names with a comma.
Some features disabled for guests. Register Today.
3d viewer in gbrl controller is not working any help ,
put i do have another ? lol when I load gbrl controller and try to load g-code it dose`nt show me the project I am cutting
ok guys i figured it out it was on the gbrl control page my jog was set to low i put it at 75%
xpro v 5
got it slowed down got it at $110=1500.00 $111=1500.00 $112=1000 now when I jog around it hardly moves would that setting be $120...
I am doing a test run on my cnc and when I hit play it shoots right out very fast to the cut need to slow it down some ,.any help would be great .
x, y going wrong way using grbl .how to convert other direction .
I figured it out it was the limit switches grounding me out making light stay on all the time now its working right .
ok heads up on the out come I narrowed it done to the X Y LIMIT SWITCHES they are touching the cnc frame so I have to find another way to attach...
I guess i am getting the routorER11 BUT I NOTICED THEY ARE OUT OF STOCK LOL
so is there any way to fix this or do i buy the er11 rotor lol would like to keep my spindle if there is a way to fix this
ok sir i did a test there are no broken wires on the xyz probe plus ,,but i took off the 2.2kw spindle and when Iend it agianst the machine it...
VFD is hooked up separtly,,,, and I tryed grounding to other area as well it dose the same thang.
i watched video about 6 times wiring is correct
I am using xpro v5 and openbuild controller with the xyz probe plus spindle 2.2kw water cooled vfw....
i was just talking to jason and every thang is matched up lights are still on all the time
thank you for reply.
having same problem
i got the cnc xpro v5 and its saying you have to use the cncjs control soft ware or open builds grbl controller I was using mach 3 witch was a lot...